Setup Question

[knpc]

Update
I made a few changes and was able to take it out again. I moved the cog back 1/4'' and raised the strut to 1deg positive. What a difference! I ran the x442 and it was much better, in the low 40s. Then I put on the m445, the boat ran great. 46.7 mph according to the gps. It was a choppy day and the boat handled great, I had no problem holding full throttle all the way down the straights. Needless to say I'm much happier now and I think she still has some more in her, especially on a calm day 50mph shouldn't be a problem.
Thanks for the help
Kevin

[Doug Smock]

Sweet Kevin!!!

Congrats!!
Doug

[EPower]

There have been quite a few guys having trouble programming the ETTIs. Rumor has it there is a programing box in the works.
I'd put some positive in the strut and ease the cg back until you get her aired out a bit Kevin. Then give that M445 a try.
Post some video if you can.
My .02
Doug

The Etti is a breeze to program did my m8 one at the pond yesterday in 5 minutes i really don't understand why people have trouble programming them
Nice boat BTW