help need brushless info !!

[Jcarlton]

i have a m tronics genesis brushless motor and esc comb . but when i program the esc the motor twitches weird . but what i need to know is it the esc or the motor . im running 12 cells in series or combine the 2 for max voltage . they are ib 3800 6 cell batts . any help would be appreciated . steve help me out man !!

[NorthernBoater]

What specific motor and speed control is it, model number and name. Does it do this when the radio is on?

[Jcarlton]

go to mtronics .net to get the full info but yes the esc wont go light up to program if the remote isnt on . but its a m tronics genesis truck esc rated at 12 cells has a average discharge rate of 80 amps max 120 . and the motor is a 600 can size 3000 kv . was made as a replacement for the e-maxx . thanks northenboater for your time. what do you think ?

[NorthernBoater]

If this only happens when the radio is on I would say something is wrong with the radio. Check to make sure your throttle adjustment is at 0. On mine if it is not, it will do weird things.

[Fluid]

Have you read the instructions? The last paragraph of the instruction sheet below may answer all your questions. Note the word "screeching".

http://www.mtroniks.net/download.asp?ResourceID=35

.