FDM Trans. Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crrcboatz
    Senior Member
    • Jan 2009
    • 914

    #1

    FDM Trans. Question

    Can the big lehner 2280 motors be used with the fdm transmission? Will it handle that large a motor??

    Curt
  • Flying Scotsman
    Fast Electric Adict!
    • Jun 2007
    • 5190

    #2
    Curt, toss the transmission and go direct drive. Blunt as usual Danny

    Douggie

    Comment

    • crrcboatz
      Senior Member
      • Jan 2009
      • 914

      #3
      Originally posted by Flying Scotsman
      Curt, toss the transmission and go direct drive. Blunt as usual Danny

      Douggie

      Hay thanks and as a newbie I was just thinking with my computer keys!!

      Danny that is fine. Curt

      Comment

      • Flying Scotsman
        Fast Electric Adict!
        • Jun 2007
        • 5190

        #4
        Curt, you are not a newbie. You have a lot of RC boating knowledge, that we all can learn from.

        Douggie

        Comment

        • crrcboatz
          Senior Member
          • Jan 2009
          • 914

          #5
          Kind words The electric concept is a good deal different in some impt areas. The rc boat thing in general is the same ie, how and why a boat does what it does but boy the combination of watts, amps, escs, motor kv, all that just makes one feel out of touch. Look forward to getting a better handle on it as time passes.
          Guess after I burn up my first esc, pop a battery or 2 and have my first fire, I'll fee like I have arrived!

          Curt
          Last edited by crrcboatz; 03-20-2009, 08:36 PM. Reason: omitted a letter

          Comment

          • lomdel
            Senior Member
            • Nov 2008
            • 708

            #6
            I learned a lot from my first ESC blow-out, Kurt. FE boating is an expensive, but valuable learning curve.

            Comment

            • jevmax
              Legend
              • Aug 2007
              • 368

              #7
              Originally posted by crrcboatz
              Can the big lehner 2280 motors be used with the fdm transmission? Will it handle that large a motor??

              Curt
              Yes, the FDM transmission can reliably be used with a Lehner 2280.

              Comment

              Working...