Kb45 motor mount

[bustitup]

ok I did some searching and didnt find any definitive motor mount to fit this motor that will work in my mm...here I have this motor mount i'm trying to modify but it looks a little flimsy......or should I start with a new fabrication

any ideas here?


yes I know i was told I should remove that old gas stuff but I kind of like it because it seems to strghthen the tunnel real nice and I like the radio box so I'm going to use it for the initial running

here is my 10xl with water cooling and my himodel 8s esc with water cooling going to run it with 6s and 8s starting with a x442 prop

[Steven Vaccaro]

That mount is light for a big motor like that. If you do use it, make sure to support the back of the motor with a small piece of wood.

[Flying Scotsman]

The ESC and 6 to 8s on that motor

Douggie

[ghostofpf1]

Lonewolf here made a nice motor mount for mine not too long ago...maybe ask him for another ??

Steve

[bustitup]

Lonewolf here made a nice motor mount for mine not too long ago...maybe ask him for another ??

Steve

Was it the same style I need with the old gassrr perch?

[lomdel]

The ESC and 6 to 8s on that motor

Douggie

That motor pulls a LOT of amps, are you sure the HM ESC will handle it. Do the calculations first, dude!

[bustitup]

What about the turnagy 100 amp 12s

[bustitup]

ok this is the info I got from Mr Watts

KB45 10xl

8s
x442 32016 rpm, 92 amps, 2537 watts, 52 mph
x440 32365 rpm, 76 amps, 2131 watts, 53 mph
y537/3 32881 rpm, 69 amps, 1947 watts, 55 mph

6s
x442 24765 rpm, 58 amps, 1241 watts, 42 mph,
x445 24190, 76 amps, 1596 watts, 44 mph
x447 23753 rpm, 90 amps, 1859 watts, 45 mph
x642 24268 rpm, 74 amps, 1549 watts, 47 mph
x645 23564 rpm, 96 amps, 1970 watts, 49 mph

[TotalPackage]

That motor can handle 6s-8s where did you get the water cooler? I desperately need one.