TFL Lucky Oct

[Big J]

I have a TFL Lucky Oct that I can not get handle. Just can not get it to run straight or turn. Even on the straight line it china walks really bad.

Yes I have tried to raized and lower the stinger but onkly a little help. This boat has a 4082 with 1600 kv. Any help I just can not run this boat.

Thank you Jeff

[leski379]

I have a TFL Lucky Oct that I can not get handle. Just can not get it to run straight or turn. Even on the straight line it china walks really bad.

Yes I have tried to raized and lower the stinger but onkly a little help. This boat has a 4082 with 1600 kv. Any help I just can not run this boat.

Thank you Jeff

What % is your CG? That hull only has turn fins correct?

[koen]

check the flex from the rudder blade and the extention from the rudder ,i had the same problem and it appeared that the rudder set was very flexible i changed the rudder unit compleet and no problem any more(this hull is a MHZ AGGRESSOR so not a RTR boat)

[leski379]

Also check to make sure your rudder is square to the boat, and your turn fin/fins. Heck even the stinger

[Bande1]

take the electronics out and pitch the rest in the trash. build you an MLBoatworks wild thing or a delta force from OSE.... and a set of trim tabs.




soon zippkits is releasing a P mono kit and a 6s rigger. that'll be great.

[Big J]

check the flex from the rudder blade and the extention from the rudder ,i had the same problem and it appeared that the rudder set was very flexible i changed the rudder unit compleet and no problem any more(this hull is a MHZ AGGRESSOR so not a RTR boat)

Thank you I will check the rudder

[Big J]

this boat only has 1 rurn fin on the right side.