6.5mm vs 8mm Bullets

[jaike5]

I use a manifold in my ltd mono to feed esc,motor, and the end bell motor mount.
J.

[TRUCKPULL]

I use a manifold in my ltd mono to feed esc,motor, and the end bell motor mount.
J.

Any pictures Jay?
Larry

[jaike5]

Yes , I'll send them to you, the mighty Q and PL mono's.

[TRUCKPULL]

Yes , I'll send them to you, the mighty Q and PL mono's.

Thank you Jay

Larry

[tbonemcniel]

We never really asked what you're going to do with the boat. If you're just sporting around, with a couple high speed passes here and there, the 1950kv will be fine on 6S. What Larry and others are getting at, is from a racing perspective, where you're hopefully full throttle for a full mile, 1950kv is better suited for 4S. I ran that very motor for a while in a 4S TFL Cheetah Cat, and it ran quite well. I paired it with a Castle X8S converted to water cooled and running Castle 6.5mm bullets, pulling 190A continuous and 260A peak (average of 9 races). So with the ZTW 200, that we all know will cut off if you exceed its capability, I'd say the 6.5mm Castle bullets will support everything the ZTW can muster. They did for me.