22 inch hydroplane setup

[U.L. HYDRO DRIVER ICE]

What would be a good motor and a esc for this boat . I would like to get around 40mph + and how many lipos should I use thanks for looking 22 inch hydroplane setup

[JimClark]

I have a 1/16th shovelnose that has a 3600 kv Ammo motor and uses a Hacker 70 and a 2s lipo with a Octura X430R prop and it is close to 40 cretainly higher than 35. If you used a 3S and a lower KV I think you would be at 40 or slightly above. Boat is 22.5 long

[U.L. HYDRO DRIVER ICE]

Which model is he motor or the mm thanks

[U.L. HYDRO DRIVER ICE]

What about using a hacker 8 L 3000 kv and a 100 amp esc with a x435 prop on 2s

[JimClark]

Here is the link for the motor

http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=000229619&I=LXLWY5&P=K

Not sure on the hacker

[JimClark]

Charles what Hydro do you have hat is 22 inches long?

Jim

[Steven Vaccaro]

Here is a setup for ya.
http://forums.offshoreelectrics.com/...ead.php?t=6143

[U.L. HYDRO DRIVER ICE]

Charles what Hydro do you have hat is 22 inches long?

Jim

It is a 22inch budweiser that 90 s hull

[U.L. HYDRO DRIVER ICE]

How good would this motor do

Great Planes Ammo 28-56-3200 In-Runner Brushless Motor and which prop

[JimClark]

Porbably have a whole lot of torque so you would most likely be able to handle a much larger prop than my boat can. My boat uses a X430. Never used one but it could work.

Jim

[U.L. HYDRO DRIVER ICE]

Do you think a x 435 would give some speed

[JimClark]

Would be worth a try on that outrunner. run it for a short time then bring it back in t check temps