MACK Products

[sjslhill]

It's refreshing to see someone work on a project not aimed at 70mph on this forum.

[Steven Vaccaro]

It's refreshing to see someone work on a project not aimed at 70mph on this forum.

lol. Whats wrong with a 70mph pt-109?

[Chop]

70mph pt-109?

70mph pt-109?

One reason I was shying away from brushed motors was if I ever wanted to speed up the boat. If I went brushless I might not have to buy all new electronics. But after thinking about it, I would probably have to do that anyway.

I want the boat to be fast, but it doesn't have to be insanely fast. Maybe if it's slow, it should be able to drop a depth charge or shoot a torpedo.

70mph pt-109?

Hmmm... but I keep getting this nagging thought.

[Flying Scotsman]

I have used Mack Marine power units...motors and gearboxes and their drive hardware. Very good quality.

Douggie

[Rex R]

methinks that a pt boat is probably good to about the low20s before you need to use trim tabs. that said, a pair of feigao 380 12L motors would fit and not produce insane speeds.

[sjslhill]

Your right Steven, Put in twin coke can sized Neu motors, a 240 hydra and 20,000mah 6S packs should do well in that PT boat

[Steven Vaccaro]

Your right Steven, Put in twin coke can sized Neu motors, a 240 hydra and 20,000mah 6S packs should do well in that PT boat

Well personally I would opt for the Hydra 180 hv and run 10s packs at a lower amperage.

[highndry]

I have used their stuff for scale projects. They are straight-up.

[Joe Friars]

My vote would be for the 310 Baracuda. That is one beautiful boat.
Joe