H&M mono torque roll

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MarkF
    dinogylipos.com
    • Mar 2008
    • 979

    #16
    Well part of your problem is your turning left. Boats only turn right because of prop torque. Make right hand ovals only and it will drive better.

    Comment

    • vvviivvv
      Fast Electric Addict!
      • May 2009
      • 1078

      #17
      Yeah, it's setup really to turn both ways, I got another run in a few days ago and got 81mph again, I think a trim tab was bent from that previous crash I hadn't noticed.

      It doesn't like the S255 prop, went back to 457 and runs fine again. GoPro kept cutting out after 1 min but here is the start of the run anyway, I got a few high speed passes on the glass water, it then took a tumble and ripped it's hatch mount out a little bit, no real damage really.

      Heres the video with the 457 back on (currently uploading)
      Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
      Uk SAW record holder

      Comment

      • MarkF
        dinogylipos.com
        • Mar 2008
        • 979

        #18
        Both ways means you let off on the throttle a little before turning left. Your not suppose to turn left at full throttle. It kicks out the back end of the boat which you already know now.

        Comment

        • vvviivvv
          Fast Electric Addict!
          • May 2009
          • 1078

          #19
          Tbh, it's my first fast mono, and jumping in with a 80+ boat is a quick learning curve.

          the issue is the chime walk, it's handling in corners is great.

          boats better on x457, it's going to be a few months till I can test again unfortunately.
          Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
          Uk SAW record holder

          Comment

          Working...