Motor choice for 6s jae 33

[rol243]

Looks like your just about there now Jim, i like the Savox servos too.

[jim82]

Have you guys played around with the cog? If so where is best? I'm currently messing around with everything trying to get that sweet spot. So far 62mph on 4s

[rol243]

what motor are you running with the 4s set up Jim ? also what type of prop ? I have my 4s pack approx 4 inches in from the transom and the hull seems to ride quite nice. c.o.g. is set around the 60/40 or balanced at the trailing edge of stock turn fin.

[jim82]

Did you add weight to the front? I am putting lipo as far forward as I can and cog is near 2in. behind the turn fin. I am running 1515 1y prop is 1450mod prop b/s. I need to work on my H-7 and try it.

[rol243]

woops, sorry Jim the cog is just about the same as you have . i was thinking of my jae 21/fe balance point not the jae-33.
i know these jae,s due to the ski like to be abit tail heavy and don,t like a lifting prop. how does your ride ?

[jim82]

Rides good just need some days of no wind to get it right. It has been crazy windy here lately

[rol243]

Hows the size of the 12 next to the 33. same length as a 33 sponson.

[jim82]

That is the mini. I been thinking about building a 12 though

[jim82]

Tried out the H-7 today 65.4mph

[rol243]

so the H7 is faster than the 1450. is the H7 stock ?

[jim82]

Stock h7. Going to try this idea out I'm sure someone has tried it before.IMG_20180328_123911546.jpg

[rol243]

just make sure there are some spring locking washers behind the wing nuts Jim. not sure if i like that idea though.

[jim82]

Yea once I get everything set right I will probably use regular self locking nuts. Just helps right now to make adjustments faster

[jim82]

The TP motor that originally had in there was squealing so I had to order some new bearings hopefully that will fix it

[rol243]

Jim, where you have your turn fin set now [ in pic ] is that about the position of the rear where its going to be left at , or are you still going to try different angles ? the setting now looks like your trying to keep the sponsons wetter , has your hull been riding abit loose in the front ?