MHZ Lizard Extreme/ Delta Force/ Rio Racing - NAMBA P Mono

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • T.S.Davis
    Fast Electric Addict!
    • Oct 2009
    • 6220

    #16
    The bare hull Pursuit, the HOR, and the HK Pursuit all come from the same TFL facility to the best of my knowledge.

    They're great boats. You just have to pay attention when you put it together to make sure it's straight. Really should check them all that way no matter the manufacturer. I have a Delta that's stone flat and another that has a 1/16" deep hook on one side. It happens. These manufacturers ain't NASA.
    Noisy person

    Comment

    • zooma
      Local club FE racer
      • May 2014
      • 652

      #17
      Thanks, Terry. I figure that I'll glass a couple of C/F tubes along side the stock motor mount, and make them long enough to be stringers. I might also put in F/G or C/F battery mount plates for the 4S2P 5000's. My old beater Pursuit has developed cracks along the top of the transom by the rudder bracket, so I would put some cloth on the inside of the new one.
      Ron - The Villages, FL

      https://castawaysboatworx.org/

      Comment

      Working...