Pursuit testing with a 4074 1800kv 180a ecs x447/3 on 6s ?

[jkr]

The pursuit i setup is 4s also.
The rest via mail.

Also the Tenshock is 3500w ....not 2600w and it is quality motor.

[lenny]

These boats just need some wings and they can fly away,
I like the sun setting runs and tunes to add to the fun.

The pursuit i setup is 4s also.
The rest via mail.

Also the Tenshock is 3500w ....not 2600w and it is quality motor.

[T3tsaya]

Hi,
How wide is that river cat32 ?

The fightercat river 32 inch boat is 9 inches wide

[lenny]

That just a 1/2" wider than my Daytona,
And with that hull you need to watch how you prop it because on torque roll from the prop.
I just us a x442 on mine or a m445,
But I should try a 3 blade.
Because they help a lot with V hull torque problem on the V hull boats I have modded so far.

[greenblast]

my set up is a 40/82 1600 kv.maybe my earlier statement was a little premature. i am just a little excited at the fact i am running a 442 in the high 40's with nothing getting up to 90 deg.

[lenny]

Well I ran 6s1p today with a x440/3 and gps speed was 48mph,
And temps were lower than on 4s1p.
I wanted to try the x447/3 but it got modded today by a big painted turtle,
It looks like he was trying to add a little more cupping to it.
He was about 18"long by 12" wide.
I was running at 36mph with gps on board when the transom came out of the water and it kick the rudder up.
That was lucky because I had the bolts pretty tight to,
I just need to give the prop some tlc to get it back in shape.

Pursuit 070.jpgPursuit 071.jpgPursuit 072.jpgPursuit 073.jpgPursuit 074.jpg

[TheShaughnessy]

That prop might be done Lenny. But see what you can do.

[kevinpratt823]

I get 55 mph with 1600kx/4082 on 6s1p and a M445 in my Cyberstorm. M445 may be a good step up from the 440/3.

[kwiktsi]

Hmm, 55mph with the m445 on that setup, nice! Now I'm curious how fast my Daytona is with the same setup on the X642! I know 8S with the 642 was ballistic! I need to get another small GPS, my damn Note 2 is too big to stuff in the boats lol.

[jkr]

A good choice is prather 225-230.
I prefer them over octura on some cases.

[lsone]

Im watching this thread getting pretty pumped to finish mine. It started as a nitro deal. Now has a neu 1521 1y in it. prop will be a 447/ 3 blade on 6s.

[kwiktsi]

457?????? Yeah, gonna be a bit much for that hull, unless you like barrel rolls :D.

[lsone]

457?????? Yeah, gonna be a bit much for that hull, unless you like barrel rolls :D.

447 3 blade, made an error

[kevinpratt823]

Hmm, 55mph with the m445 on that setup, nice! Now I'm curious how fast my Daytona is with the same setup on the X642! I know 8S with the 642 was ballistic! I need to get another small GPS, my damn Note 2 is too big to stuff in the boats lol.

Mine is actually a neu 1521 1y, so 1577 kv. A 642 was under 50 mph in same setup.

Sent from my SCH-I535 using Tapatalk 2

[kwiktsi]

Strange. You'd think the more pitch would have helped MPH, not hurt it. Maybe too much lift? My Daytona really seems to like the 642 over the x445.