Traxxas Spartan 67.2 mph run

[Zackthrills]

Do I bend the inner tabs or the outer and I have an adjustable drive strut as you can see. Would moving that help at allor leave that alone

[Heaving Earth]

Zack, do you actually comprehend anything we are saying? Or are you just reading words on you're screen? From what I can tell, you like to do things your own way despite advise given....

[Powerboat 5000]

Leave the strut neutral for now. Do one adjustment at a time

[Zackthrills]

No I hear what your saying need the trim tabs. Got it I'll do that first I'm just asking if that helps any ? Sorry. Just learning

[lenny]

Hey,
Three bladed props help a lot with torque roll on mono's.
I was using a x646/3 on my 36"modded to FE shockwave with a 4074 2200kv on 4s in most of my video's.
Now testing a Pursuit with a 4074 1800kv on 5s with a x447/3 and runs pretty good.

[Powerboat 5000]

Zack, drive down to Sarasota and I'll get it straight lol

[Powerboat 5000]

Then we will run for "play money"

[Zackthrills]

Powerboat I can do that lol don't play. I might just take you up on that. Lol

[kevinpratt823]

Go to a bigger pond, or get a smaller boat. You really don't have the space to stay up on plane long enough to take advantage of what you're running. At least maybe try bigger turns, like maybe going out and around the fountain, so you stay on the throttle and keep her moving the whole time, as opposed to just back and forth. When you do those quick 180 degree turns you're basically starting from a dead stop each time, and torque roll is worst when accelerating from a standstill. All the prop in the world is useless if you can't hold it wide open long enough to get up to speed.
And maybe ask a moderator to change the title of this thread..........

[Powerboat 5000]

Come on down

[Powerboat 5000]

I've got a great pond

[Powerboat 5000]

My pond is about 10 acres, surrounded by trees. It's glassy most of the time

[Powerboat 5000]

Eight packs charged and waitin' on ya

[Powerboat 5000]

Yeah, maybe this should be moved over to the traxxas rtr Q&A

[Zackthrills]

Ya I'm going to go to a big lake on Tuesday and I'll video it. I will get allot longer runs so I can get on plain and I'll move the right side inner trim tab down a turn. If those props are to much should I put the x440 on it? I will have my gps I hope by Monday tracking shows it should be delivered Monday so that way I can see if I get any better suited results with this setup or not.I can't wait to get this thing running right if I could ever get a long run in with out it wanting to chine walk or roll I think it will be really fast