Tweet
I thought kintec sold them just under a different name
-
What's life if you ain't having fun -
Not that I can see. Kintec sells the hulls but doesn't have a rudder listed as being an option for a Zonda. You might get one of their rudders to fit but can't be sure without actually doing it. Got one coming from OSE that I'm going to try adapting but hard to tell if that will work just from the pics.PERTH AUSTRALIA
|| 2 x SV 27R || Impulse 31 - ver1 || Traxxas Spartan || Kintec Pursuit || Zonda Cat 41" || Insane FE30 || OuterLimits 870mm || TFL Ariane 36" || ProBoat Zelos 48 ||Comment
-
I'm working om my Zonda at the moment and I will tell all that have one that you should pull the Rudder of and replace as soon as you can. The problem is the 2 bolts that hold it in place. they are mounted in the seam of the hull and in a very short time will crack the hull! GET RID OF IT!!!twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
THIS IS THE WAY TO GO BUT CHNGES TO THE SERVO MUST BE DELT WITH TO USE IT!
Beef up the mounting pate by adding a saddle no matter what you use.
014.JPG
check out my zonda upgrade. http://www.horracing.com/product_inf...r7aatlla31sba2twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
thinking on this boat, (one of a few)
what other after market and retro-fits for it?Comment
Comment