First run with new motor/esc

[Mulisha]

Email Steven about timing for my motor if that's all good I will have to reset strut and tabs as you said and maybe even prop down and just toy with it till i get it running fast but cool. It is slow to take off got SF set to standard for start up type. Is that normal or to do with setup

[martin]

If your getting around 95kph or 60mph with a 4074 motor then the boat set up cant be all that bad, are you running for 5-7 mins constantly.

[Mulisha]

Yeah running it pretty hard for the 5-7 mins but then bring it in at let it cool right down before next run

[martin]

Thats a long time to be running that set up.

[Mulisha]

I should halve the run time?

[martin]

Personally i would run for 1 min & check temps then 2 mins & check temps & so on, so you know exactally whats going on re temps & run times to find the best accepable temps & run time. Whilst still looking at sorting out the best set up re strut settings, tab angles & cg etc.

[Mulisha]

thanks heaps ...

[josh]

I'm a bit late but leo 4074 1650 is 5d wind

[Southwest]

Now from pictures, the trim tabs are to far from strut and 1 1/8" from strut and 1/16" up from transom bottom and level.