I know I've asked this before. What's out there now? Is there a latest and greatest?
Hv esc
Collapse
X
-
Steve at OSE has Swordfish esc's as you know and Keith Bradley Boats also sells other versions of Hifei esc's... But, just add water tubes to each side of the PCB like Schulze and you you have a YGE esc clone capable of 180Amps+
YGE CLONE
There is open copper to solder the tubes to. The one Chinese Hobby shop that sells the smaller 120amp HV (4-14 cells) has the marine version that is just conformally coated after they solder on cooling tubes.
I beat the snot out of the LV 120 amp version in my PTSS Hydro and it just keeps going. I did partially burn another one last summer but, it works for bench tests. Of course the motor it was hooked up to (UL-1) melted before the esc did.Nortavlag Bulc
-
Terry: I've been using 2 of Fightercats HV controllers in my 10S Cat and Mono.....can't beat the price (at that time) and they work OK...they seem to have slow/ med/fast settings only, and thats in the linear setting of the programming!!!!!
Off and fast would suit you.Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
Comment
-
Not sure how many amps I want to pull. Nobody needs to tell me how few are required to power an 1/8. I never listen anyway.
Electrify'n this:
Messina Sept 2012 017.JPG
It's a Dygert twin wing. Some of you have seen it run I'm sure.Noisy personComment
-
Sweet ride Terry. That would be lots of fun.
ESC sorta depends on the motor too. What do you plan to install??Nortavlag Bulc
Comment
-
-
I remember one maybe but, I think they sorted it out with caps and or firmware; it was in another thread.Nortavlag Bulc
Comment
-
Steve at OSE has Swordfish esc's as you know and Keith Bradley Boats also sells other versions of Hifei esc's... But, just add water tubes to each side of the PCB like Schulze and you you have a YGE esc clone capable of 180Amps+
YGE CLONE
There is open copper to solder the tubes to. The one Chinese Hobby shop that sells the smaller 120amp HV (4-14 cells) has the marine version that is just conformally coated after they solder on cooling tubes.
I beat the snot out of the LV 120 amp version in my PTSS Hydro and it just keeps going. I did partially burn another one last summer but, it works for bench tests. Of course the motor it was hooked up to (UL-1) melted before the esc did.
thanks.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
Comment