How about a BBY Oval master?

[JohnZ]

Would like to know what motor to use in one of these 21" BBY O.M. Thinking maybe a Leo 3650 series as it is approximately the same size as a ROAR motor, but not sure which KV to use for a 2S pack, and what prop would be a good choice.
Would this be considered N2 Mono?
I had one of these several years ago and they're great to run in small ponds and even in the river in front of my house. Wish I hadn't sold it, but you all know how that goes.
cheers

[Southwest]

......

[RandyatBBY]

The boat was designed for 05 motors I will be running mine with a 17.5 and two cells at the 2013 FE Nats. I would love to run a a hot little 3.5 or 5800Kv Mamba max on 2S and the little props........and we have I will pop back later with some pictures.

[jstolz]

Would like to know what motor to use in one of these 21" BBY O.M. Thinking maybe a Leo 3650 series as it is approximately the same size as a ROAR motor, but not sure which KV to use for a 2S pack, and what prop would be a good choice.
Would this be considered N2 Mono?
I had one of these several years ago and they're great to run in small ponds and even in the river in front of my house. Wish I hadn't sold it, but you all know how that goes.
cheers

By todays standards, an Oval Master would be considered an N1 mono. When we were running NiCds and NiMh N2 boats were the size of the O.M.. Today's N2 boats are up to 27" long.

[RandyatBBY]

I run the Oval master 26 in N2

[Alexgar]

I have a ovalmaster 21 run it on a proboat 1500 and ul1 motor with a x442 and am very impressed you cant go wrong with bby just make sure you line it with fg if its the abs hull

[Southwest]

.......

[Namba328]

I have a ovalmaster 21 run it on a proboat 1500 and ul1 motor with a x442 and am very impressed you cant go wrong with bby just make sure you line it with fg if its the abs hull

Ive ran a Ovalmaster with a ul-1 motor and a x642 and it was pushing about 55-60mph when it took off and hit the docked paddle boat and sank. My bec quit. I may down the road build another one for a saw application, idk yet.

[Alexgar]

A quick video

http://m.youtube.com/watch?v=2kN_3gwy2jo

[Southwest]

.....

[RandyatBBY]

Ive ran a Ovalmaster with a ul-1 motor and a x642 and it was pushing about 55-60mph when it took off and hit the docked paddle boat and sank. My bec quit. I may down the road build another one for a saw application, idk yet.

I do not recomend that. That is sorta like we ran the War Zone on 12 cells NiMh, It was fast as hell but you could loose the boat at any minute.

[RandyatBBY]

Can't view your videos as they don't come up and switch to other videos and get the same thing, Check out before us to view, thanks!

Me too!

[Alexgar]

try that

http://www.youtube.com/watch?v=2kN_3gwy2jo

working for me but try that

[Southwest]

.....

[RandyatBBY]

Man I would like to see a long full speed run. Cool though.