Proteus D/Y option motors - reviews ?

[drwayne]

Any reviews from ppl who have used these ?
Not interested in onlooker comments ...

Factual/actual, not tourist memoirs !

regs
Doc Wayne

[Joern Markset]

Yes I have run Proteus and I find them very reliable.
Great motor for a small amount of money.
Here is some pics of the boat: http://www.facebook.com/media/set/?s...4176425&type=3

[driftah]

interesting hull mod hmmm

[carlcisneros]

Joern

can not access the pictures

[Joern Markset]

In this boat I have the X520, using CC ICE 240 esc and Haiyin 6S 5000 mah 40C.
I pulled a X455/3 during this test.
Amps peaked at 223.

[drwayne]

Thank you.
Log is very helpful too !
Do you have any final data ?
Wayne

[drwayne]

Joern

can not access the pictures

I recently joined facebook just to view pictures !

[Joern Markset]

Didn`t measure any speed cause lack of time.
I built this boat only for testing purposes, since I know SpC`s very well it was an easy choice. If I manage to do more testing before the water gets frozen I`ll let you know.
I also have X524 T2 and T3 which is supposed to be tested, but that will be in a larger boat. (DF 90)

[drwayne]

Didn`t measure any speed cause lack of time.
I built this boat only for testing purposes, since I know SpC`s very well it was an easy choice. If I manage to do more testing before the water gets frozen I`ll let you know.
I also have X524 T2 and T3 which is supposed to be tested, but that will be in a larger boat. (DF 90)

De winter is Au summer... 80->120'f (30->47'c) .. now for 3 months
The only ice I see is inside my drink!

I have 2x T2 for MHZ135 cat... will post some details when tested.

Thanks
Wayne

[gyrotron]

Didn`t measure any speed cause lack of time.
I built this boat only for testing purposes, since I know SpC`s very well it was an easy choice. If I manage to do more testing before the water gets frozen I`ll let you know.
I also have X524 T2 and T3 which is supposed to be tested, but that will be in a larger boat. (DF 90)

Hi Joern,

I what boat length application did you use the X520 motor? I am building a 42" shallow v hull with the AquaStar version of this motor; same exact specs. I will be running it on "Y" configuration.