TOBSD.com

[gfm1135]

Does anybody have any experiance or feedback on TOBSD.com? I am looking at their mono ARTRs.

[martin]

Speak to b20btec on this forum, he sold one of their hulls last week on here as he wasnt going to build it in the end. He said it took 3 weeks to get from China, the hull looked like good quality in the picks but it was a rigger hull.

[gfm1135]

Thanks Martin. I am looking at their Arowana ARTR

[Make-a-Wake]

Here's an Arrowanna shipped from the US for $159:

http://www.nitrorcx.com/99b-10016-black-700-ep-artr.html

[gfm1135]

That looks a little different. This is what I am looking at

http://tobsd.com/ViewDetails.aspx?ProductID=64

[driftah]

just buy a delta force from here on ose bud,same design...better built.the guts of the other boat are junk...better off buying sep or planning a gut job on the rtr u can get all parts to build here or if u want rtr look at the impulse 31 or revolt 30

[gfm1135]

I would like to but they don't offer a hull with hardware. I have never built from a bare hull.

[gfm1135]

I can add motor and electronics. Don't have a clue about adding drive shaft and rudder. Wouldn't want to ruin a good hull

[Basstronics]

Ive bought a small strut off him. Customer service was top notch and shipping took a bit as usual.

The only problem Ive noticed is his prices are simply way to high compared to others. If his prices were inline he would get more business. Guy is friendly enough though.

[Brushless55]

right here bro
http://forums.offshoreelectrics.com/...suit-Mono-kits.

[martin]

The Exceed Arpro is a diff boat, much smaller with a low kv outrunner motor. The Exeed is the same boat as the Dragon Hobby arpro.

[properchopper]

right here bro
http://forums.offshoreelectrics.com/...suit-Mono-kits.

This is without a doubt the BEST DEAL. Way better, faster, longer lasting than the others.

[b20btec]

I did order a rigger from them, it took a little while to get, but it is china. You get a email after ordering saying it can take up to ten days to leave their warehouse, then calculate snail mail, close to three weeks. The rigger hull quality was really nice, a tad thin, but I can't compare to others since it was my first rigger. I was going to do lay carbon for strength. The price was very reasonable and the quality was better than expected. I didn't get to building the rigger because Im building a larger cat, if it weren't for that I wouldve love finish the rigger.

[gfm1135]

Thanks b20btec? Go to hear. This is what I Am thinking about buying. Any opinions?

http://tobsd.com/ViewDetails.aspx?ProductID=64

[b20btec]

I would personally buy the one from OSE for 4 something. The power combination that Steve is offering is way better and if you were to purchase alone will be over 200.00, 4074 2200kv with sk180 is a solid fast reliable combo.