-
House CleaningLast edited by twissted; 09-06-2012, 12:08 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!! -
Wow........................sexy gal there!! Thought it was a Genesis knockoff at first but nope, quite a bit different. Screaming for 4082's on 6s!!!!!!!!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight= -
Outta be quite fast as-is though...........the 4082's just popped in my head.........................Very niceNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Jan @ knitec has same boat for $650.
Dont know how bad shipping hit you from China...?42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
Dont forget to run an external aerial on the rx in a carbon boat.Comment
-
You may be disappointed with the speed, as that is a big hull. You will need a lot of battery juice and very good ESCs and the motors may not cut, it might work on lower KV motors and 8S, prop selection etc.
DouggieComment
-
House CleaningLast edited by twissted; 09-06-2012, 12:09 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
nice boat keep us advised on performance pls....MY RETIREMENT PLAN?????.....POWERBALL
74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...
Comment
-
House CleaningLast edited by twissted; 09-06-2012, 12:09 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
House CleaningLast edited by twissted; 09-06-2012, 12:09 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
House CleaningLast edited by twissted; 09-06-2012, 12:10 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
I will also follow this build with interest! Cool rudder that. How would the servo set-up for that look? With the Hobbyking 180's and a decent servo, this would work out to be an expensive build...Comment
-
It looks like the boat has a 115mm rudder on it...very small for a boat that size. An upgrade in rudder in probably a good idea. Do you know that you can buy just that hull there too? Sometimes it's best to buy just the hull if you plan on upgrading it anyway. The motors will likely need to be mounted in a different place if you end up upgrading the power system.Comment
Tweet
Comment