tunnel hull

[BHChieftain]

Here's a close up of the woodstuff hull (which is also the 2nd place boat in Randy's vid-- we both crashed in the same corner...). The mods were to make the waterproof box for the lipos/esc/rx/servo (nice job, but not done by me...). Cyberxt's PS295 is like this only better...

Chief

[blizard05]

You guys arn;t making it easy,to decide on a hull. a big thanks to you all Larry B

[siberianhusky]

Currently running a VS-1, keep eyeing the ps295 kit though. Hearing nothing but good about them by the guys who are racing regularly. Maybe next winters project.

[blizard05]

Anyone ever done an inboard powered tunnel? Some of the gas boys are doing it

[dana]

hey larry, heres the tunnel im refurbishing. put some carbon in the compartment. not much so far but ill get around to it lol. i thought about the inboard thing but, kinda makes no room for batteries unles i extend the compartment back to the transom. ill stick with the outboard, they work well. IMG_1797.jpgIMG_1778.jpgIMG_1903.jpg

[blizard05]

If it doesn't work out as a boat,you can always put a neck and strings on it. You did some beautiful guitar work.

[steveo]

I'm looking to build a FE tunnel,to show up the nitro boys,6 of them running at the pond. Where do I start,hull,lower unit,motor etc? Thanks Larry

i think there 2 ways to look at this, 1 you can really embarrass them with your electric tunnel or 2 just have the edge over not to make them look to bad, decide this first then people will chime in on a set up that fits your needs or goal

[dana]

thanks larry!

[blizard05]

i think there 2 ways to look at this, 1 you can really embarrass them with your electric tunnel or 2 just have the edge over not to make them look to bad, decide this first then people will chime in on a set up that fits your needs or goal

Don't want to show them up too bad,just want to have the edge over them. I'm thinking the BBY would be a good starting point,I could build another next Winter Larry

[RandyatBBY]

The ABS boat will do that, The Fiberglass hull for $100.00 more will last you several years. Your choice, Oh and I will help you all I can to run fast and have fun.

[blizard05]

The ABS boat will do that, The Fiberglass hull for $100.00 more will last you several years. Your choice, Oh and I will help you all I can to run fast and have fun.

I will go for the FG boat, all that's standing in my way is the $$$$ btw, i'm not new to rc boats,over 30 yrs,building gas,I'm just starting with FE. I think FE is the future of rc boating. thanks Larry

[RandyatBBY]

I will go for the FG boat, all that's standing in my way is the $$$$ btw, i'm not new to rc boats,over 30 yrs,building gas,I'm just starting with FE. I think FE is the future of rc boating. thanks Larry

When you are ready just let me know. I know haw it is with $$$ I do not have the credit cards any more, so I have to work in a budget of the cash on hand now.

[blizard05]

Got to sell 2 zipp C boxes N box and I box, then i will bug you. Larry

[RandyatBBY]

Got to sell 2 zipp C boxes N box and I box, then i will bug you. Larry

sounds great!

[BHChieftain]

Randy's tunnels are real nice-- I know, I've lost to them...
Chief