need more flow for outboard cooling

[haggis]

Made a new cavitation plate on the hor racing outboard with the intake behind the prop but ive tested it in the bath and it seems a bit weak

anybody got any suggestions?

[jamespl]

Surely it won't work in the bath as the boat isn't moving along? The prop may put a tiny bit of water through but you won't get anywhere near the flow as you would if the boat was doing 30mph.

[haggis]

i thought behind the prop would be the best place for it but maybe im wrong.

suppose ill just have to test it properly.

[carlcisneros]

Haggis
get it out on the water to test it out.
It looks proper in the pic.
never test water flow in the tub.......................

[jamespl]

It's in the same place as the Proboat stiletto and it worked fine on mine. Should be fine, as said get it out on the water.

[Chrisg81983]

Looks good to me u need to get it moving more than you can do in a tup to notice water flow even though the prop is pushing water on it thats still not enough by itself

Chris g

[haggis]

http://youtu.be/ZlTkQ0s4sy8

Well I tested it and it seems to be working fine. Not quite the jet of water i expected but the tiny motor didnt get too hot

cheers lads

[carlcisneros]

Haggis
That looks really good guy.

very nice running boat you got there.

am very impressed.

[noah]

what size prop is on your outboard and if you could post a link that would be awsome