New mystic 1380mm .What sould i put in there ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #31
    Can we see this go yet?? VIDEO??
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"

    Comment

    • leopard15
      Junior Member
      • Apr 2011
      • 25

      #32
      Unfortunately the weather didn`t help so i `ll give a try on sunday.Will the water inlets do what they suppose to do ,i mean will they provide enough water ; I used double water inlets on its side right next to the shafts but because is the first time i use this type of watercooling system ,i`m a little wary.

      Comment

      • leopard15
        Junior Member
        • Apr 2011
        • 25

        #33
        Originally posted by nata2run
        What leos did you end up getting. Funny, it looks like the 114 version? my new 138 had a complete different rudder system.
        Twin 5692 1090 kv
        Twin swordfish 240hv
        I `ll start with octura L/R 450/3
        8cell 5000mah see what it will do and maybe try 10s.

        Where did you buy it from ,maybe there are differences between German and American hulls .

        Comment

        • nata2run
          customcfparts.com
          • Nov 2011
          • 1837

          #34
          Hulls should be the same, for some reason it just looked smaller. Sounds like a good setup, although I think you'll need bigger props to get some speed. The motors can definetly pull. Your water inlets should work just fine.
          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
          "Follow someone's footsteps and you will always be a step behind"

          Comment

          Working...