So so far i have ran it with: Turnigy 120A esc, stock motor, and have it on 6s. Never have owned a boat, always trucks and cars so i wanted to try my hand at it. Guy at hobby shop sold me a 38mm grim racer (sp?) prop. Seems to run ok, motor temps are way to hot though. Ive been lurking on here reading threads on this boat, i know the stock motor is junk. Looking to upgrade to a Tacon 3674 1300kv motor and would like to dial in the prop size. I could run on 4s but i have a bunch of 3s packs i wanted to run in this.
Also read about drive shaft/flex cable upgrades? i would like to can the 4mm and go to3/16th but have no clue what to order.
Ive also replaced all the small dia tubing for cooling system and cleaned up the rudder pick up, everything seems to run cool except motor. (pulling big temps, around 175 degrees)
So any advice on a reliable 6s setup would be greatly appreciated! Cant be beat by my buddies Miss G boats...
Also read about drive shaft/flex cable upgrades? i would like to can the 4mm and go to3/16th but have no clue what to order.
Ive also replaced all the small dia tubing for cooling system and cleaned up the rudder pick up, everything seems to run cool except motor. (pulling big temps, around 175 degrees)
So any advice on a reliable 6s setup would be greatly appreciated! Cant be beat by my buddies Miss G boats...

Comment