New HK inrunner motors

[Jacked1]

At first I thought these were rebranded leopards but i think they are Keda motors. Any input? They are 4 pole so I am guessing they are at least better than 3674 2 pole motors.
http://www.hobbyking.com/hobbyking/s..._Inrunner.html

Edit: The motor has the same specs as the leopard but has the motor windings comming out of the back like the Keda.

[sampit]

Turnigy 4082 1600kv

At this price i have ordered one

http://www.hobbyking.com/hobbyking/s..._Inrunner.html

just hope its a rebranded Leopard, sure looks like one.
or does it?

mmmmmmmmmmmmmmmmmmmmmmm

[znus]

I have ordered one 4082 too! Exciting

[Jacked1]

I have ordered one 4082 too! Exciting

Ditto!
(it is going in my 24" surge crusher!! )

[Brushless55]

Thank you for posting this!

[iamandrew]

http://www.hobbyking.com/hobbyking/s..._Inrunner.html

WOWZERS!!!! i think i might have to give this a test

[znus]

It seems they´re adding ~5 new 4-pole motors every day! And re-stocking some of the old KB 36's & 45's which have been sold out for ages. I hope they can keep the supply up! I don't wanna wait for months on my 4082.

The spec on the 4082 says 1500 kv but the motor in the pic is stamped 1600 kv.

[iamandrew]

I was just thinking, has anyone seen one of these with a decent size motor in them?
http://www.hobbyking.com/hobbyking/s...t_1000mm_.html

how many S do i need for that motor i put above?

[sampit]

Fast ass 5682 in today and 5692

http://www.hobbyking.com/hobbyking/s..._Inrunner.html

[Jacked1]

That 5692 and a Fightercat ESC sound like they would be a very nice combo!

[Smoothops]

Nice find as soon as one of you get it and run it let us know if its worth it. Also what cooler jacket would you use for it?

[Jacked1]

All the same jackets as the leopard motors, They have the same dimentions and are either copys or rebranded leopards.

[Drax21]

From the info these have less power than a Leopard or Keda motor but is around the same for No load current, Turnigy also sell 2000Kv of these motors but unlike leopard or keda will only take a maximum of 14.8v. They may change this info later but for the moment based on my stats Leopard and Keda are the better motors. Tacon 4074 motors are still on offer at Hobbypartz and they are near enough exact copies of Leopard for only $49. Please upload a video of one of these Turnigy motors in action.

[znus]

From the info these have less power than a Leopard or Keda motor but is around the same for No load current, Turnigy also sell 2000Kv of these motors but unlike leopard or keda will only take a maximum of 14.8v. They may change this info later but for the moment based on my stats Leopard and Keda are the better motors. Tacon 4074 motors are still on offer at Hobbypartz and they are near enough exact copies of Leopard for only $49. Please upload a video of one of these Turnigy motors in action.

Might be lesser quality bearings but since you'd run a 2000 kv on 4s anyways I see no problem (translation = I really want the 4082 to make my day)

[crrcboatz]

That 5692 and a Fightercat ESC sound like they would be a very nice combo!

measurements say it is a 56x82.