Best setup for single drive Apparition

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crystalclearvisual
    Andrew Shepherd
    • Apr 2011
    • 26

    #31
    Originally posted by crystalclearvisual
    thanks matey
    Hi Mate, ok i have decided to go for 1 of these 2 babys

    Leopard 4 pole 3674 1700KV brushless motor 2 turn Y wind

    Specification:
    Max voltage: 34V
    Max Amp: 78A
    Max power: 2400W
    RPM: 1700KV/volt
    Resistance: 0.009
    Non-load current(7.4V): 2.3A
    Diameter: 36mm
    Length(excluded shaft): 60mm
    Weight: 315 gm
    Mount hole depth: 7mm
    Shaft diameter: 5mm
    Shaft lenght: 18mm

    or

    Leopard 4 pole 3674 1900KV brushless motor 2 turn Y wind

    Specification:
    Max voltage: 34V
    Max Amp: 78A
    Max power: 2400W
    RPM: 1700KV/volt
    Resistance: 0.009
    Non-load current(7.4V): 2.3A
    Diameter: 36mm
    Length(excluded shaft): 60mm
    Weight: 315 gm
    Mount hole depth: 7mm
    Shaft diameter: 5mm
    Shaft lenght: 18mm

    Do you think running 1900kv on 22.2v is to much?
    Andy Shepherd

    Comment

    • crystalclearvisual
      Andrew Shepherd
      • Apr 2011
      • 26

      #32
      Hi Mate, ok i have decided to go for 1 of these 2 babys

      Leopard 4 pole 3674 1700KV brushless motor 2 turn Y wind

      Specification:
      Max voltage: 34V
      Max Amp: 78A
      Max power: 2400W
      RPM: 1700KV/volt
      Resistance: 0.009
      Non-load current(7.4V): 2.3A
      Diameter: 36mm
      Length(excluded shaft): 60mm
      Weight: 315 gm
      Mount hole depth: 7mm
      Shaft diameter: 5mm
      Shaft lenght: 18mm

      or

      Leopard 4 pole 3674 1900KV brushless motor 2 turn Y wind

      Specification:
      Max voltage: 34V
      Max Amp: 78A
      Max power: 2400W
      RPM: 1700KV/volt
      Resistance: 0.009
      Non-load current(7.4V): 2.3A
      Diameter: 36mm
      Length(excluded shaft): 60mm
      Weight: 315 gm
      Mount hole depth: 7mm
      Shaft diameter: 5mm
      Shaft lenght: 18mm

      Do you think running 1900kv on 22.2v is to much?
      Andy Shepherd

      Comment

      • crystalclearvisual
        Andrew Shepherd
        • Apr 2011
        • 26

        #33
        Originally posted by tiqueman
        My exact thoughts as well. That motor will not handle 6S. I wouldnt go more than 4 on it.
        I Cooked my Stock motor in less the 5min on 6s
        Andy Shepherd

        Comment

        Working...