spartan boat with a cc1520 motor I need the best esc Im a gas guy I dont know this stuff Im doing two boat at once the spartan and 43''team pro from Warehouse hobbies I need the pros to tell me what to do for 43'' and the esc
For 6s, I'd get a HV esc to be safe. The Swordfish HV 240 is a good esc at a good price. Running esc's at the limits can have a heavy price to pay. It isn't the place to skimp.
this is a cheap alternative but should pull the heatshrink off and check the fets for proper contact just to be safe i had i blow because the heatsink wasnt seated properly othe than that they will pull 120-150 amp reliably
That's cool guys like you make it hard for guy that want to get in to hobbies I ask a question in the question forum I think you dont know you can ask me about gas I will tell you a thing or two so Im asking can some one help me with 43''gas mono I like it to become a fast electric I need motor info/esc info/prop info /lipo info Thanks to all that will help the new guy
I have no experience with big monos,but Id try this:
Neu 1527 1/Y on 6s.Use an 240HV esc and maybe start with an Octura X450 prop.Not too sure on the prop,but I know Neus can turn decent sized props with no problem.As far as lipos go,Id run at least two 3s 5000mAh packs in the highest c rating you can get.I want to say run 4 of these batteries for the extra mAh,but Im not sure how to do it.
Comment