Functional Exhaust

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • H2OCamel
    FAST ELECTRIC EVERYTHING
    • Oct 2007
    • 484

    #16
    Nice looking! both my HPR's have a similar setup!
    "Discussion is an exchange of knowledge; an argument, an exchange of ignorance." Robert Quillen

    Comment

    • Jesse J
      scale FE racer
      • Aug 2008
      • 7116

      #17
      any video of them functioning? You gonna shoot your water out let through the outside ones? would like to see it in action... may do something similar.

      ..... some people..... "both my HPR's"....
      "Look good doin' it"
      See the fleet

      Comment

      • H2OCamel
        FAST ELECTRIC EVERYTHING
        • Oct 2007
        • 484

        #18
        Originally posted by Jesse J
        ..... some people..... "both my HPR's"....
        Well that was back when I was well to do now I'm going through the fleet looking to dump most everything except the (2) Hpr's I've seen video of them running in the snow so I have all weather capable fleet besides Jesse If I can't keep both one has your name on it

        I haven't had the video editing stuff set up yet since the move, I just dug it out of the garage while inventoring my fleet so well see. The vido of the death roll I don't think there were close-ups of the back so you could see them?
        "Discussion is an exchange of knowledge; an argument, an exchange of ignorance." Robert Quillen

        Comment

        • lsone
          Member
          • Aug 2008
          • 48

          #19
          I built a set of 5/32" headers for my brushless nqd tear into boat. Just a fun camping boat. 3s 3000kv deal


          Comment

          • Jesse J
            scale FE racer
            • Aug 2008
            • 7116

            #20
            Nice, action - gotta love it! I have fabbed up some with aluminum tubing - I can get a pic up here, while on the subject.

            Chris, sounds good - gotta call ya up one of these days I'm in my car. I don't recall the rear end of your HPR... I was too much in awe of the beauty and how nervous you were getting as we tossed it in the water.
            "Look good doin' it"
            See the fleet

            Comment

            • old guy
              Senior Member
              • Nov 2008
              • 687

              #21
              I shoot bows for fun and when I cut my arrows I have left over little carbon fiber shafts. this is what I'm going to use and you could get them from any bow shop for free just another why to do it

              Comment

              • egneg
                Fast Electric Addict!
                • Feb 2008
                • 4670

                #22
                Yes Jesse the water will come out the outside tubes. Might get some video this spring when its ready to hit the water.
                IMPBA 20481S D-12

                Comment

                • H2OCamel
                  FAST ELECTRIC EVERYTHING
                  • Oct 2007
                  • 484

                  #23
                  Isone nice headers! they look great. What is the speeed of it?

                  Jesse, my personal cell phone got run over and is dead, I can still get my mesages but I don't have the money for a new one so call my work cell 3033586207 :)
                  "Discussion is an exchange of knowledge; an argument, an exchange of ignorance." Robert Quillen

                  Comment

                  • lsone
                    Member
                    • Aug 2008
                    • 48

                    #24
                    Originally posted by H2OCamel
                    Isone nice headers! they look great. What is the speeed of it?
                    Thanks! My first time working with Brass, that was fun at first.... NAT. Pretty much HAVE to use heat to bend it, too much heat and bend too fast cracks the material

                    Not sure on the speed yet. I need to get a GPS inside the thing. It rocks out pretty good though! I built 2 identical boats based on a guy in tokyo. That way I can let a girlfriend or friend play along too and not have one boat dominate the other one. The guy in Tokyo, His runs were from 28-33mph.

                    Comment

                    • Diegoboy
                      Administrator
                      • Mar 2007
                      • 7244

                      #25
                      Originally posted by egneg
                      Yes Jesse the water will come out the outside tubes. Might get some video this spring when its ready to hit the water.
                      Can I man the camera??
                      "A quick temper will make a fool of you soon enough."
                      . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                      Comment

                      • egneg
                        Fast Electric Addict!
                        • Feb 2008
                        • 4670

                        #26
                        Originally posted by Diegoboy
                        Can I man the camera??
                        I would be honored if you did Danny.
                        IMPBA 20481S D-12

                        Comment

                        Working...