Genesis cat,,,

[Diesel6401]

I just ordered one from HK about 5 mintutes ago. Not sure about this 4mm crap. Anyone upgrade to a 3/16 strut yet? If so got a link to hardware purchased? I have a Feigao 11xl laying around and just ordered a turnigy 80amp hv esc, I plan on running 6s. Will 2 3s lipos fit in the hull?

[HYDROJERRY]

I no you can get the exact same rudder strut from here but its in 3/16 but im not going for worp drive yet so im going to run mine with the factory crap for now,,,Ill post pics of mine tonight for sure...

[sailr]

You can get a 3/16" shaft stinger here:

http://www.r2hobbies.com/eng/proddetail.php?prod=rcbp1836015

[HYDROJERRY]

Said id post picks and here they are, notice the 15min. boat stand i made,fast just for the pics,,,pritty proud of it to just need two pieces of rope for a handle..

[johnf]

Looks great HJ! Wish someone in the states stocked these. It's a killer looking hull.

[Diesel6401]

Very nice Jerry.

Starting to think because of the length of this hull if a 540 11xl will be to small. Any input guys? I have a 580 7l and a leopard 4074 2200kv laying around. Will a 3/16 flex fit into the stock strut?

[johnf]

Diesel, how has your luck been with the 580l? I have some projects in mind and it seems fitting, yet I've read of quite a few people having them grenade.

[Diesel6401]

Haven't used it yet, I bought it off a member here on OSE and he had good luck with it.

[Rumdog]

Bigger than a XL. It is a big cat. Run a Neu, or Neu/Castle. the 1521 or 1520 should get it moving. 1527 is your best bet.

[Diesel6401]

Bigger than a XL. It is a big cat. Run a Neu, or Neu/Castle. the 1521 or 1520 should get it moving. 1527 is your best bet.

That's what I was afraid off. I only paid $219 for the boat not including shipping really didnt want to spent close to that on a motor. Most importantly I have 3 motors without a home, 1 of them has to work right? Don't want to buy another motor anytime soon. Out of the motors I have which due think would be best?

540 11xl
580 7l
leopard 4074 2200kv

[johnf]

Haven't used it yet, I bought it off a member here on OSE and he had good luck with it.

Good deal bud. Hope to hear it runs good for ya.

[Make-a-Wake]

Very nice Jerry.

Starting to think because of the length of this hull if a 540 11xl will be to small. Any input guys? I have a 580 7l and a leopard 4074 2200kv laying around. Will a 3/16 flex fit into the stock strut?

Throw the leopard in it on 4s!! That would be a great setup in my opinion!

[Diesel6401]

Throw the leopard in it on 4s!! That would be a great setup in my opinion!

That's what I'm thinking.

[Rumdog]

Run the 580. Be careful, do not overprop it! Many, including myself have had bad luck with that motor. Or, sell them all and get a Neu.

[simo71]

What size Prop are people running stock on 4s? would a 42mm prop suit (two blade)? I only intend on running 4's due to it fitting in with other boats.