JAE 21 FE fast setup?

[Mike Caruso]

Im using a non-ajustable strut that i got from Zippkits. therefore their isn't allot of setup changes. The boat is built dead strait and true, as a tool maker i am very anal about this sort of thing. The prop would be about the only changes i could make. I have a few to choose from and have become quite good at working them for what i want... but this has always been for .21 size nitro riggers, i can get nitro over 70.
Im sure that prop performance wouldent differ a much between nitro and FE...Would it???
I have never used an H series prop befor, but this seems to be quite popular in the FE world.
Maby i will give one or two a try.
Thanks for the info guys.

Steve.

Hi Steve,
My partner just ran 78.7 mph on Garmin NEU 1415 1-Y (OLD STYLE CASE NO AIR HOLES) (smaller case than 1515 same rotor size), ESC 240 SWORDFISH, 8MM connectors 6s. He told me prop but not sure I think 1450. This is a JAE .21 built just like yours square and true to the plans. It has more left in it as he was driving I was watching running attitude. It ran 78.7 on the whole front sponson. I call it flat footed so there is more speed left on the table. The pond we run on is to small.
Mike

[grsboats]

Steve If I understood you want a fast boat just for fun so my recipe for a Jae Fe running in the low 90's:Leopard 4082 2000kv running 6S and Turnigy 180 prop 1450 reduced to 47mm and cup 3,5 check it ou on the video

http://youtu.be/ym0vOQDDbIc

Gill

[Leesome]

What sort of run time do you get with that ^ combo? I am looking into building one of these and those speeds are pretty impressive.

[grsboats]

Leesome this is typical saw set up so short run times but as you can see in this video it can make 6 long passes with a 5.0A battery.Gill