short run time
Collapse
X
-
Enjoy it and dont push it.. Fire and smoke damage sux!!! Been there and dont want to do it again.Comment
-
I am not sure what size and weight your rigger is but I know the 7S motor and 2S lipo is a winning combo for me. I use a Mystery 100A esc water cooled by me.
My pack is a Turnigy 30C 5000mAh with 3.5mm bullets all round.
My rigger is long, light and fast. 26"loa with a 21"tub
On a x432 I can run for 10-12 passes up and down the pond which is over 100m long.
With a x632 I can get 6 good passes and it comes in well warm but not alarmingly hot.
This has been gps'd at 79km/h and it is quicker now.
I ran it once with a 3S pack on a 432 and it was radared by police at 101 km/h. Not a reccomended setup at all.
I can not know if mine spikes to 150A, I hope not.See it....find the photos.....sketch it it....build it........with woodComment
-
Thanks Simon I read one of your threads and thats why i decided
on the 7S.the boat is my avatar its OAL 25" with a 23"tub weighs
in at 1.117kg with 5000mah batteries or .819kg less batteries.Todays
run with the X430 only spiked 108.03 maps and ran under 90amps.
i have 5.5 bullet connectors all around.I ran again with a X432 this afternoon was
ruff but i did get about 6 laps before I flipped it. I do notice a big difference
between the X430 and X432.I have a gps coming for my eagletree so it will be
interesting to see what it says.But overall today in the chop watching it fly across
the water I was very happy.:canada
Comment
-
a couple of pictures from today:canada
Comment
Comment