Tweet
I have hooked up a SuperVee esc with a 10xl fiegao motor. I figured that the 10xl is roughly the same type of motor as comes with the SV. The boat is a nostep m&H that is 23" long. Think it will not fry with a small prop??
-
-
the XL is much bigger and will pull more amps than what the speedo will allow plus the kv is much lower
a 12L is a much better choice, faster and pulls less amps
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
-
I run a SV controller with a 9xl for years in one of my boats,,just watch the prop and you will be fine.Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
Thanks Doby, I am going to test it out today, we will see how it goes. I am just going to run it with some CF props that are small.Comment
-
Well, it ran great! Really a nice boat and very fast. I need a new GPS to get some numbers, but it was covering the entire pond very quickly. Ran it for about 4 minutes and the temps looked good on everything. I just used a CF 3blade that comes with the SV. That worked well. I have some new props coming in this week so I will give them a try.Last edited by electric; 04-25-2010, 10:24 PM.Comment
-
I run the 9xl in a Blackjack with that conrtoller and a SV prop and it hits the 40mph mark with good temps consistently. Glad it worked well for you.Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
that's awesome you can use an XL with this esc!.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
As Doby mentioned be very carefull with the application...prop, boat etc.
That Esc is not rated for high amp/voltage applications.
Nanny DouggieComment
Comment