Vision Tunnel

[Kris Flynn]

Guys, what I was saying in that post was that if you set it to 35%+ it WILL nose steer...just like if you set the Vision at 32%+
Not that I have set the CoG on any of my Visions to that far forward...

I have seen the Cobra run and it does run well, But I still prefer the overall looks of the Vision and I know for sure that it can run into speeds of 60MPH + with ease. Not that our P-Spec setups will get near that just yet

[Darin Jordan]

it can run into speeds of 60MPH + with ease. Not that our P-Spec setups will get anywhere near that anytime soon

Hehehehe.... my last years setup was clocked up around 53 (EagleTree airspeed sensor)... and Brian's VS-1 and Greg's Cobra are both faster than that boat... :D FUN, FUN!!

[Kris Flynn]

I meant to put a ( i will add that and re-phrase now) at the end of that LOL

[Darin Jordan]

I meant to put a ( i will add that and re-phrase now) at the end of that LOL

Kris... You pretty much totally ROCK, as far as I'm concerned... something tells me you either have, or will soon be, breaking the 60mph mark with your P-Limited setups!

[bigwaveohs]

When I did run the VS1, the CG was 8", and I ran the stub shaft at 3/16 above the sponson. The prop I like best is the ABC 42x55, backcut, detongued and the tips rounded. I now run the Cobra - for the money, you can't beat this boat and they're cheaper than a VS1. If you do order one, order it without the radio box (the box that comes with it won't work), and it'll save you $20.

I tried as you suggested and the boat flew at too high an angle and was diffcult to control in the corners...went back to 1/16" above sponsons and near zero stub shaft angle and it settled right down...corners at WOT.