Ajoda 200 amp esc?

[domwilson]

What schultz-clone would that be?

[Gerwin Brommer]

This one : http://suppo.awardspace.com/ESC/200A.html

[sailr]

I have one of those around somewhere. It's HUGE. Guess I'll dig it out and offer it up here.

[Ub Hauled]

Let me be the first to ask you Sailr,
size, price, etc...

[Gerwin Brommer]

Sailr :

the Schulze is huge aswell :-)

[ozzie-crawl]

Ozzi :

That's why the Schulze-clone is by far the best !
Multi-layered esc's suck !!!
The majoda with pipes on EACH board is far better IMO , compared to the multi layered esc's with coolingplates on each layer.
Why cooling plastic housings if you can cool bare metal ???????

BTW : why do i see so many CC's burn up recently ????????????

i think this is what people are trying to find out gerwin,if it does have a cooling plate on each board, from the look of it it doesnt
to me it looks like it may have a plate running across the top board that then goes down each side with the tubes attached to each side
iam not 100% sure on this but i think the reason there is a lot of multi layered boards is the larger the fets the slower the switching speed, so they use many small fets (low amp) instead of just a few larger (higher amp) ones
as a lot of esc,s are made for helis or planes with high pole motors they need very fast switching fets
if iam rite in this then esc,s just made for 2-4 pole motors could have larger (higher amp) fets with lower switching speed therefore needing far less fets making the need for only a single layer board

[Gerwin Brommer]

That's why I only use esc's that are designed for boats :-)
A few weeks ago I saw the prototype of the next esc from
"modellbauregler.de" , 2 guys who are so dedicated to our hobby !!!!
120 A cont. and so unbelieveble small !!!!!!!!!!!!!!
It really blew my mind, CC eat your hart out ;-)

[Drag Boat Bob]

Of course there is always "The Beast" which touts 'no water cooling'.

http://www.huayu-hobby.cn/product.asp?id=522#top

If of course, it doesn't sink your boat at 450 grams.

With 48 FET's, 8 Rubicon caps and double 12 guage wire and cooling plates (air) on both sides, it truly is "The Beast".

[crabstick]

unfortunately I have heard of these "Beasts" going too

[Ub Hauled]

Ken Joye has that Beast (the one in the picture), he was saying its a pretty good ESC...
why do you say the will burn Matt?

[Gerwin Brommer]

Anyone who has a spare suppo 200 schulze knock-off ?? ( and want to get rid of it ?)

[crabstick]

I will try and find the Thread, I too was looking into getting one of these for a 1/8 scale Hydro and I googled around and found a couple that had burnt.

[crabstick]

Several in this thread have Burnt.

http://jorgespiropulo.com/~rumrunn/feforums/showthread.php?p=264046

[sailr]

I have one of them somewhere! I'll start searching!

Anyone who has a spare suppo 200 schulze knock-off ?? ( and want to get rid of it ?)

[domwilson]

Have you tried contacting them directly? http://www.suppomodel.com/