abs repair/ receiver pack

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeepers
    Fast Electric Addict!
    • May 2007
    • 1973

    #16
    here is the hole please keep in mind that the I have removed alot of the damaged plastic so that I could see the damage done to the wood structure.
    Attached Files

    Comment

    • Jeepers
      Fast Electric Addict!
      • May 2007
      • 1973

      #17
      Originally posted by D.Smock
      That is my 4th grade school pic. LOL

      Doug
      heheheheh!!!!:D

      Comment

      • Jeepers
        Fast Electric Addict!
        • May 2007
        • 1973

        #18
        Originally posted by saleens7
        whoa...i just saw the pic.....:D :p ...
        :p are you related to a wookie?:p hehehehe!

        Comment

        • Jeepers
          Fast Electric Addict!
          • May 2007
          • 1973

          #19
          Originally posted by avengersteve
          has the pack ever gotten wet? i had one fall apart on me after boat was capsized for about 10 min
          yeah when I had a crack in my hatch. but what do you mean by fall apart? this pack looked like the end of the cell just fell off. (sorry no pic already disposed of it)

          Comment

          • avengersteve
            Senior Member
            • Apr 2007
            • 321

            #20
            mie was an ib3600 6 cell pack, the bottom 2 cells fel clean off. (shrinkwrap was removed to see obvious damage
            restoring the collection

            Comment

            • saleens7
              Fast Electric Addict!
              • Apr 2007
              • 1108

              #21
              Originally posted by Jeepers
              :p are you related to a wookie?:p hehehehe!
              .....uhh.........maybe.....

              thats just the back of my head...ever see shaun whites (pro snowboarder) myspace picture on the HP computer commercial....that was my inperationg for it...
              saleens7, the wookie of rc boating

              Comment

              • Doug Smock
                Moderator
                • Apr 2007
                • 5272

                #22
                Originally posted by Jeepers
                here is the hole please keep in mind that the I have removed alot of the damaged plastic so that I could see the damage done to the wood structure.
                That is pretty ugly Jeepers. I've never had to repair one in that bad of shape. You may be able to shape a piece of foam to glue in the hole and then glass over the top.

                Doug
                MODEL BOAT RACER
                IMPBA President
                District 13 Director 2011- present
                IMPBA National Records Director 2009-2019
                IMPBA 19887L CD
                NAMBA 1169

                Comment

                • Jeepers
                  Fast Electric Addict!
                  • May 2007
                  • 1973

                  #23
                  Originally posted by saleens7
                  .....uhh.........maybe.....

                  thats just the back of my head...ever see shaun whites (pro snowboarder) myspace picture on the HP computer commercial....that was my inperationg for it...
                  heheheh! thats funny! yeah I seen that commercial!

                  Comment

                  • Jeepers
                    Fast Electric Addict!
                    • May 2007
                    • 1973

                    #24
                    Originally posted by D.Smock
                    That is pretty ugly Jeepers. I've never had to repair one in that bad of shape. You may be able to shape a piece of foam to glue in the hole and then glass over the top.

                    Doug
                    Doug, this boat hit an erosion wall the impact was so hard that it ripped the motor screws through the wood, washers and all, it also pulled on the wire drive so hard that it pulled the octura pointed brass prop nut off the shaft!

                    i will give your suggestion a try. I will post pics of the repair if it comes out good.

                    Comment

                    • Doug Smock
                      Moderator
                      • Apr 2007
                      • 5272

                      #25
                      Originally posted by Jeepers
                      Doug, this boat hit an erosion wall the impact was so hard that it ripped the motor screws through the wood, washers and all, it also pulled on the wire drive so hard that it pulled the octura pointed brass prop nut off the shaft!

                      i will give your suggestion a try. I will post pics of the repair if it comes out good.
                      Give it a shot. You got nothing to loose but a little time and material.

                      Good luck!!
                      Doug
                      MODEL BOAT RACER
                      IMPBA President
                      District 13 Director 2011- present
                      IMPBA National Records Director 2009-2019
                      IMPBA 19887L CD
                      NAMBA 1169

                      Comment

                      • Jeepers
                        Fast Electric Addict!
                        • May 2007
                        • 1973

                        #26
                        Originally posted by D.Smock
                        Give it a shot. You got nothing to loose but a little time and material.

                        Good luck!!
                        Doug
                        Thanks Doug!

                        Comment

                        • Doozie870
                          Senior Member
                          • Apr 2007
                          • 828

                          #27
                          Wow that was quite a smack, what happened?

                          Comment

                          • Jeepers
                            Fast Electric Addict!
                            • May 2007
                            • 1973

                            #28
                            Originally posted by Doozie870
                            Wow that was quite a smack, what happened?
                            reciever pack failed, hit an erosion wall at full speed. jacked it up pretty good

                            Comment

                            • Mich. Maniac
                              Banned
                              • Apr 2007
                              • 1384

                              #29
                              WOW! that pic of your 4th grade pic is on a couple billboards in my town for a real-estate company! thats funny stuff

                              Comment

                              • Jeepers
                                Fast Electric Addict!
                                • May 2007
                                • 1973

                                #30
                                ahhh man Mr smock you got rid of the pic in your avatar I gotta kick every time i seen it:D

                                Comment

                                Working...