Lehner 3060 875kv

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vvviivvv
    Fast Electric Addict!
    • May 2009
    • 1079

    #16
    What is it? mono etc?

    i was using a prather s235 and i was starting to chime walk and the hull was the limiting factor of going faster.
    Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
    Uk SAW record holder

    Comment

    • EddieM41
      Senior Member
      • Aug 2018
      • 192

      #17
      Mono, starting to chime walk also......

      Comment

      • vvviivvv
        Fast Electric Addict!
        • May 2009
        • 1079

        #18
        I'm not too clued up on single mono's tbh (saying that i crashed my twin LMT 30xx powered mono at the UK saw also )

        is it a V point hull or does it have a bit of a ride patch? i was experimenting with the H&M hull i was using then crashed it and bent a bunch of the trim tabs / running gear and could never get it to run properly after that.
        Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
        Uk SAW record holder

        Comment

        • EddieM41
          Senior Member
          • Aug 2018
          • 192

          #19
          V shaped with a small ride pad. I have trim tabs on it also. Probably should have built a twin!

          Comment

          • koen
            Senior Member
            • Mar 2020
            • 357

            #20
            Thry diverend props like ABC and Prather ,the ABC give lift to the front and keeps the transom deeper a Prather lifts the transom and keeps the bow down maybe this helps

            Comment

            • EddieM41
              Senior Member
              • Aug 2018
              • 192

              #21
              I'm running ABC...what I run on most of my boats.

              Comment

              Working...