Raider ESC

[ray schrauwen]

the raider is a hobby wing esc. Take a look at the manual, same as all the hobby wing manuals

No it is not. I know a name they are sold under and I guarantee they aren't Hobbywing escs. Program boxes are completely different.

I will not utter the name out of respect for Steve's business.

[Mxkid261]

It would be great if we could get atleast a 200A raider controller they'd sell out real quick Lol

[T.S.Davis]

They probably would.

Tom ordered a 160 to beat up on. I'll let you guys know what we see.

[T.S.Davis]

Sorry. A 150.

Not enough runs to make a blanket statement about these but the first few runs were impressive. Tom put one in his P Sport and it came back with out a hiccup. First impression was/is pretty good.

[kfxguy]

Sorry. A 150.

Not enough runs to make a blanket statement about these but the first few runs were impressive. Tom put one in his P Sport and it came back with out a hiccup. First impression was/is pretty good.

Good deal. Same I've experienced. Can't be beat for the $$.

[Darin Jordan]

Awesome Darin. Thx! Hopefully terry is ok with this in his thread. Very useful info.

OK... Settings:

ENDPOINT: I've done it with both 100%, and opened up to 150% on the FWD side. I think either works. I set 150 on the FWD side because it makes sure I get ALL of the throttle.
SUBTRIM: Set your throttle SUBTRIM to -100B, or -100L, depending on the TX.
THROTTLE TRIM: On your throttle trim setting (the small trim lever by the wheel), trim -100.

On the Castle: Set for FIXED endpoints

This should do the trick. MAKE SURE that you rebind once you get everything setup. Otherwise, Neutral won't always bee neutral and if you flip, the boat will failsafe to a slightly ON condition.

Hope this helps.