38" H&M Intruder twin to begin

[Jesse J]

Oh right, yes straps up to me no prob. Just leave me a couple threaded holes where I can throw in some screws, maybe 3mm? Whatever you have to thread it with just let me know and I get me some of them screw types.

I am not really sure what you are asking second... I was planning on JB welding a couple 1/16" aluminum plates to the hull that had bolts sticking out that could go through the holes I see in the bracket. So the holes would need to be smooth and then I would put locking nuts on the bolts sticking through thus bolting the mount to the tunnel, but still removable.

Hope this answers your questions.

[Punisher 67]

Jesse the strap mounts are threaded 6/32 or close to 3mm

I will leave the hull mount holes as is 11/64 or do you want them one size up to 3/16 to fit a 8/32 bolt through

In post #88 the 4th picture on the bottom of mount you will see 6 holes , those are to bolt to boat hull

[Jesse J]

Sorry I didn't get back yesterday - got busy. strap threads sound good, lets step up to 3/16" on mount if you haven't sent the stuff off yet, want the mount to be beeeeefy.

Thanks Peter, I can't wait to post pics of these puppies mounted in the truder.

I have decided to go with a thick teflon liner inside 1/4" K&S, to make a smoother ride and less noise - no metal on metal, thanks to consultation with the Wohlt-meister. He is makin me some custom drive lines out of .078" piano wire and 6mm stubs. I had to send him the strut so it is as perfect as Peter's work.

This is truly a "group build". Mounts from the Zichinator, struts from the Wohlt-meister, hull practically donated from the Camelman, hardware and tips from lots of you good folks. Too bad we can't all get together and break a bottle of champagne over the bow, actually better to drink the champagne and recycle the bottle.

I am now scheming on the paint plan. I would like to see you guys' favorite offshore racer paint scheme, thanks.

[CornelP]

It has to be the Miss...

[bustitup]

lOOKING SWEEEEET J

A dream build for sure

[bigpapa]

Peter you da man !!!!!!!!!!!!

[Punisher 67]

Thanks Tod

Jesse your stuff is done and will be shipped out tomorrow airmail , those thin aluminum flats you wanted to make I made some out of 1/8 aluminum the thinnest I have . if you go to 1/16 you can use the bolt holes for a template . My paypal will be PM'd to you and can you Pm me your full addy for shipping verification

I just want to say it was a real honor the be a part of this build

[bigpapa]

awsome awsome wk peter

[jingalls007]

If I'm not there the day this boat see's water, your going to have one less friend to give old equipment to can't wait to see this!!

[bigpapa]

boooooooo hooooooooooooo
just kiddin want to see that beast also
lol

[Jesse J]

you all will be duly notified and invited, just let me know how many bottles of champagne to get...

[Jeff Wohlt]

Got your strut this evening and your shafts are done. 6mm with 3/16" step down prop stub. 078 wire deeeeep in them.

[wolf IV]

nice jeff! jesse, jeff did me up some shafts exactly like these less the wire as i have .187 flex all because i love these stingers! his work is great!!!! i debated between this hull and a maritimo.. im building a twin timo as we speak ...this is such a beutiful hull , looking forward to see how your boat turns out!!!

[Jesse J]

Nice work Jeff, really like!
Yes, Wolf these nice cat hulls are tough to choose between, the important thing is to choose and then build it!
Now all I do is wait for my special made components to move forward, thanks guys great work.

[Punisher 67]

Jesse your tracking numbers have been emailed to you , everything insured in full and sent XPRESSPOST guarantied there in 6 days or less