Diegoboy's Mini Budweiser

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • IONY
    Member
    • Jul 2008
    • 36

    #31
    well i use this servo and yes it is a smole one
    Attached Files

    Comment

    • IONY
      Member
      • Jul 2008
      • 36

      #32
      i want to change with this micro

      Comment

      • Diegoboy
        Administrator
        • Mar 2007
        • 7244

        #33
        Originally posted by IONY
        well i use this servo and yes it is a smole one
        *Dimensions: 20.9mmX11.4mmX22mm
        *Operating Speed (4.8V no load): 0.10sec/60 degrees
        *Stall Torque (4.8V): 10.2 oz/in (0.7 kg/cm)
        *Temperature Range: -30 to +60 Degree C
        *Dead Band Width: 7usec
        *Operating Voltage:4.0-7.0 Volt

        Ya. I'm sure you need a new servo, not a new rudder.
        My servo has 39 oz-in (2.8 kg/cm). as opposed to your 10.2 oz/in (0.7 kg/cm)
        Want to sell your old rudder?
        Last edited by Diegoboy; 04-26-2009, 08:13 AM.
        "A quick temper will make a fool of you soon enough."
        . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

        Comment

        • IONY
          Member
          • Jul 2008
          • 36

          #34
          Nop i will try with the new servo

          Comment

          • Meniscus
            Refuse the box exists!
            • Jul 2008
            • 3225

            #35
            Lol!
            IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

            MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

            Comment

            • HOTWATER
              Fast Electric Addict!
              • Nov 2008
              • 2323

              #36
              Originally posted by Diegoboy
              *Dimensions: 20.9mmX11.4mmX22mm
              *Operating Speed (4.8V no load): 0.10sec/60 degrees
              *Stall Torque (4.8V): 10.2 oz/in (0.7 kg/cm)
              *Temperature Range: -30 to +60 Degree C
              *Dead Band Width: 7usec
              *Operating Voltage:4.0-7.0 Volt

              Ya. I'm sure you need a new servo, not a new rudder.
              My servo has 39 oz-in (2.8 kg/cm). as opposed to your 10.2 oz/in (0.7 kg/cm)
              Want to sell your old rudder?

              Diego, you are hillarious!!

              Very cool Mini Bud! I love it!!

              -Kent
              "Will race for cookies!"
              IMPBA D12
              My Gallery: http://forums.offshoreelectrics.com/album.php?u=1738

              Comment

              • Diegoboy
                Administrator
                • Mar 2007
                • 7244

                #37
                I'm going to have a hard time with the current decals. They are under the clear coat.
                "A quick temper will make a fool of you soon enough."
                . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                Comment

                • egneg
                  Fast Electric Addict!
                  • Feb 2008
                  • 4670

                  #38
                  Diego I was thinking (no it didn't hurt). If the plastic hull is red all the way through. Try some citrus strip and it may remove the clear and the decals leaving you with a red hull.
                  IMPBA 20481S D-12

                  Comment

                  • Diegoboy
                    Administrator
                    • Mar 2007
                    • 7244

                    #39
                    It's Fiberglass.
                    "A quick temper will make a fool of you soon enough."
                    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                    Comment

                    • egneg
                      Fast Electric Addict!
                      • Feb 2008
                      • 4670

                      #40
                      Well then it sounds like a repaint - bummer.
                      IMPBA 20481S D-12

                      Comment

                      • Diegoboy
                        Administrator
                        • Mar 2007
                        • 7244

                        #41
                        Maybe just the upper half
                        "A quick temper will make a fool of you soon enough."
                        . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                        Comment

                        • tylerm
                          Senior Member
                          • Nov 2007
                          • 310

                          #42
                          Watch those fibreglass hydros like that- i have seen the big ones split open and all the hull was was a vac-formed plastic shell with a layer of fibreglass inside

                          Comment

                          • Diegoboy
                            Administrator
                            • Mar 2007
                            • 7244

                            #43
                            Tylerm I can assure you that this hull is Fiberglass (except for the cowl exhaust part)
                            "A quick temper will make a fool of you soon enough."
                            . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                            Comment

                            • domwilson
                              Moderator
                              • Apr 2007
                              • 4408

                              #44
                              You'll have video of this before you post it in the swap shop, right?
                              Government Moto:
                              "Why fix it? Blame someone else for breaking it."

                              Comment

                              • Diegoboy
                                Administrator
                                • Mar 2007
                                • 7244

                                #45
                                To Domwilson (after a video run)
                                "A quick temper will make a fool of you soon enough."
                                . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                                Comment

                                Working...