Tweet
Is it all paint or decals?
-
Nortavlag Bulc -
Clean build. Looks Great.Government Moto:
"Why fix it? Blame someone else for breaking it."Comment
-
Last edited by RCprince; 12-03-2009, 06:43 PM.Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
-
Ken, that's a sweet Cat...
Ken
BTW you got a pretty cool name to
OK, You Go First!!!
Comment
-
thats a nice couple of looking cats very clean
Comment
-
Thanks everyone for the comments. Ray I live in Edmonton, the flames and numbers are decals, the canopy and back stripes are paint then cleared the hull.
KenComment
-
Lo0ks to be a serious job, have funJust about finished my HOTR cat, just have to get the battery hold downs in and its ready for the ice here on the ponds. Hardware is: Medusa 3680/2000 kv, Turnigy 180 esc. I used the rudder that HOTR sells but switched the strut over to a Speedmaster 21 strut. I found it easier to fit a 1/4" brass stuffing tube with teflon liner and the Octura .150 flex shaft. The motor mount was made by Peter Zicha.
Ken
Comment
-
Really clean build Ken, great job on the carbon fiber she looks nice.Is this going to be a 4s boat?Waiting for the video now.Just about finished my HOTR cat, just have to get the battery hold downs in and its ready for the ice here on the ponds. Hardware is: Medusa 3680/2000 kv, Turnigy 180 esc. I used the rudder that HOTR sells but switched the strut over to a Speedmaster 21 strut. I found it easier to fit a 1/4" brass stuffing tube with teflon liner and the Octura .150 flex shaft. The motor mount was made by Peter Zicha.
KenComment
-
Can't wait to take it for the maiden run but all our ponds are frozen now so will have to wait until spring
. I'll be running it on 4s since its a 2000kv motor. This was the first time I've used carbon fiber and found it fairly easy to work with, just had to be careful not to move it around to keep the straight weave pattern look but with the epoxy resin it gives it a cool reflective look and really stiffens the hull up.
KenComment
-
Very nice and clean job Ken , looking forward to seeing her run at the pond....
Last edited by Punisher 67; 12-11-2009, 04:00 AM.Necessity is the mother of invention.............
Youtube Video's http://www.youtube.com/user/Titanis2000Comment
-
My son went out with me "Brave lil guy"
and shot a vid.
It is 25 dergees the edges of the pond are frozen and the boat came in with ice chips all over!!! I took off my X440 and put on a X442... BIG DIFF!!! OMG, this is a fun boat!!!
OK, You Go First!!!Comment
-
Looks great!
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Sure Ken go ahead, rub it in for us up North now that we got 20cm of snow today and everything is frozen solid till spring while your letting her rip
. Very nice run, looks great. 
KenComment
-
Trust me guys, we were so cold it took me and my son to open the hatch and unplug the power! But a fix is a fix...
OK, You Go First!!!Comment
-
I guess that was the end of that!!! Pond is now good for ice skating!!!
OK, You Go First!!!Comment
Comment