Project VooDoo mono build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Old School
    Senior Member
    • Aug 2017
    • 686

    #136
    It is a thing of beauty and a testament to your skill. You would regret it if you did sell it.

    Comment

    • fweasel
      master of some
      • Jul 2016
      • 4287

      #137
      Originally posted by Old School
      It is a thing of beauty and a testament to your skill. You would regret it if you did sell it.
      they're all his children and each one that gets sold hurts a little.
      Vac-U-Tug Jr (13mph)

      Comment

      • kfxguy
        Fast Electric Addict!
        • Oct 2013
        • 8746

        #138
        I have some interesting news. I’ve been meaning to pull the logs and see what it says but I’ve had no time. Got around to it tonight. Well I found out I didn’t set the throttle end points correctly. I tried setting it like swordfish because that’s what I’m used to. Well an mgm is slightly different. Pulling my logs after I set the throttle and trying it out again on the bench (I tried it before and after on the bench to be sure before I made changes) confirmed it. I wish I would have thought of this when I was at the campground. O well, now I can’t wait to run it again to see what speeds I’ll get. I may end up running it on 6s also because that’s what I built it to run on. I can’t wait!
        32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

        Comment

        • TRUCKPULL
          Fast Electric Addict!
          • Apr 2007
          • 2969

          #139
          Originally posted by kfxguy
          I have some interesting news. I’ve been meaning to pull the logs and see what it says but I’ve had no time. Got around to it tonight. Well I found out I didn’t set the throttle end points correctly. I tried setting it like swordfish because that’s what I’m used to. Well an mgm is slightly different. Pulling my logs after I set the throttle and trying it out again on the bench (I tried it before and after on the bench to be sure before I made changes) confirmed it. I wish I would have thought of this when I was at the campground. O well, now I can’t wait to run it again to see what speeds I’ll get. I may end up running it on 6s also because that’s what I built it to run on. I can’t wait!
          Travis

          I remember we talked about this a few years ago.
          I was inquiring about the Castle ESC's at that time.
          I remember the full throttle setting was 118% to 120%
          This is what I use on all my Castle 240's
          I have 8 of them now.

          Larry
          Past NAMBA- P Mono -1 Mile Race Record holder
          Past NAMBA- P Sport -1 Mile Race Record holder
          Bump & Grind Racing Props -We Like Em Smooth & Wet

          Comment

          • kfxguy
            Fast Electric Addict!
            • Oct 2013
            • 8746

            #140
            Originally posted by TRUCKPULL
            Travis

            I remember we talked about this a few years ago.
            I was inquiring about the Castle ESC's at that time.
            I remember the full throttle setting was 118% to 120%
            This is what I use on all my Castle 240's
            I have 8 of them now.

            Larry
            Yea that does work with some escs but I think it doesn’t help with an mgm. I just did the process wrong. I feel certain I’ll get the boat where I want it to be now. I think it should do over 50 on 4s and on 6s it should go really fast. At least 75-80 maybe more.
            32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

            Comment

            Working...