Delta Force 35 in. Pirate from OSE

[Beaux]

IMG_0052.JPGIMG_0051 - Copy.JPGIMG_0053.JPGIMG_0054.JPGIMG_0055.JPG

[Beaux]

I wish I could take a better picture the shine on this is unbelievable . I used laquer spray cans for the red white and blue and cleared
it with six good coats of urethane with my spray gun. I call this boat America, love it or get the he]] out.

[Beaux]

Does anybody know what a good starting point for the cog would be for this boat? I'm fixing to put in some battery trays and I want to get them close.

[martin]

A good starting point for most monos would be 30% from transom, monos usually range from 28% - 32%.

[Beaux]

Thank you sir.

[CraigP]

I’m running 30% on my DF 29, it’s handling great. Not sure if that applies to the 35 or not, but I think 30% is pretty generic.

[Beaux]

Thanks, that's where I have it. I usually don't do battery trays, but I set them where I can adjust both ways. Thanks again.

[CraigP]

FWIW, I run a 4s and 6s config in my DF29, using 2s batt packs. On 6s, I have a pack on each side with one in the middle, ahead of the motor. On 4s, I take out the center pack. The faster you run the boat, the more forward you will want to set the CG, so keeping your options open to move your packs is a good play in my book.