Carbon fiber cheetah build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kfxguy
    Fast Electric Addict!
    • Oct 2013
    • 8746

    #91
    Originally posted by SlickZERO
    Where did you get the motor mount? I would like to get one.
    The one in this build? Kintec.
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

    Comment

    • Bduncan
      Senior Member
      • Jan 2013
      • 296

      #92
      The cheetah Travis Thin built

      Still couldn't be happier with this build. While the Neu 1521 1y amd swordfish 300 were nice, Travis and I decided on a Lehner and a MGM esc yo complement the first class build. Will be sending out some test run data soon. Travis, specs on the new setup?

      Comment

      • kfxguy
        Fast Electric Addict!
        • Oct 2013
        • 8746

        #93
        Originally posted by Bduncan
        Still couldn't be happier with this build. While the Neu 1521 1y amd swordfish 300 were nice, Travis and I decided on a Lehner and a MGM esc yo complement the first class build. Will be sending out some test run data soon. Travis, specs on the new setup?
        2260 lehner, 1644kv. 8mm shaft. Mbp collet. Mgm 25035-3 x2 Esc with dual power and motor wire option.
        32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

        Comment

        Working...