Mr Krabs build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andym
    More Go Than Show Prop Co
    • Apr 2007
    • 2406

    #661
    Paddy you are retired and it's 4 years till you are retarded mate. That dementia must be setting in early. Ha Ha I make myself laugh sometimes.
    If the m447 is OK how about a detounged x645 with a little cup to reduce lift?

    Comment

    • Xzessperated
      Fast Electric Addict!
      • Apr 2008
      • 3060

      #662
      Originally posted by andym
      Paddy you are retired and it's 4 years till you are retarded mate. That dementia must be setting in early. Ha Ha I make myself laugh sometimes.
      If the m447 is OK how about a detounged x645 with a little cup to reduce lift?
      Andy I have been retarded for a long time.
      I see no report about you testing that sport 40 on here yet. Have you got broken legs or pig flu or the lake dried up? Pictures, video and a report is what is needed
      Several boats in various stages of destruction

      Comment

      • old guy
        Senior Member
        • Nov 2008
        • 687

        #663
        Know I got 6 boats last year and I have not had the time to put one in the water and now I'm off for my 4 week fishing trip and when I get back I get knee surgery and then it will snow again some time in september looks like Mr Krabbs is going to have to sit on the shelf
        Rick

        Comment

        • toysRme
          Member
          • Jul 2009
          • 75

          #664
          Originally posted by andym
          Paddy you are retired and it's 4 years till you are retarded mate. That dementia must be setting in early. Ha Ha I make myself laugh sometimes.
          If the m447 is OK how about a detounged x645 with a little cup to reduce lift?
          Wouldnt have one for sale.......? and a 6717/400 for My zenoah tunnel?
          If i could stop the hop and get more drive it will probably break the 100kph,
          and the cells are not working hard yet.
          thankyou everybody for your observations and feed back.
          STUFF NITRO GO LIPO FASTELECTRICS.COM
          OFF-SHORE-ELECTRICS.COM
          INVENTOR OF LITHIUM CELLS:bowdow

          Comment

          • andym
            More Go Than Show Prop Co
            • Apr 2007
            • 2406

            #665
            Send me a PM. I normally get sent raw props and $25.00 . They get sharpened and balanced and posted back Aust Post inc. For international it is still $25 Aust plus actual shipping costs. Cupping is free.

            Comment

            • andym
              More Go Than Show Prop Co
              • Apr 2007
              • 2406

              #666
              Just had a look in the prop box and I do have a M645, Send me a PM

              Comment

              • Hydro3
                Junior Member
                • Feb 2009
                • 5

                #667
                Mr Krabs

                Hi guys,
                I am very pleased with the results of my mr Krab, where I participate in the Italian championship Hydro 2 and 3

                Greetings from Firenze
                Massimo
                Special thanks a Steven Vaccaro..... my Supplier Reference


                Attached Files
                Last edited by Hydro3; 08-02-2009, 06:40 PM. Reason: don't upload from url

                Comment

                • Xzessperated
                  Fast Electric Addict!
                  • Apr 2008
                  • 3060

                  #668
                  Originally posted by Hydro3
                  Hi guys,
                  I am very pleased with the results of my mr Krab, where I participate in the Italian championship Hydro 2 and 3

                  Greetings from Firenze
                  Massimo
                  Special thanks a Steven Vaccaro..... my Supplier Reference


                  http://www.gigapower.net/core/news.php?extend.4
                  Massimo,
                  Welcome and thanks for sharing your video and pictures with us. It is good to get some input from Italy.
                  Are fast electric boats popular in your country? If you have time perhaps you could tell us a little about the setup of your boat.

                  Paddy
                  Several boats in various stages of destruction

                  Comment

                  • Hydro3
                    Junior Member
                    • Feb 2009
                    • 5

                    #669
                    Originally posted by Xzessperated
                    Massimo,
                    Welcome and thanks for sharing your video and pictures with us. It is good to get some input from Italy.
                    Are fast electric boats popular in your country? If you have time perhaps you could tell us a little about the setup of your boat.

                    Paddy
                    Hi Paddy
                    I am honored to share with you my experiences, I would remind you that setup of my Krabb is 6 minutes oval races only.(no for SAW).
                    Fast electric are very popular in my country.
                    Massimo
                    P.S. Last final champ 2008..............
                    Attached Files

                    Comment

                    • toysRme
                      Member
                      • Jul 2009
                      • 75

                      #670
                      Hi all,
                      Andym thanks for the x645 you sharpened and balanced for my XS3 it ran awesome with less hop and more drive.
                      the XS3 ran 96 kph until i hit something in the water and bent the rudder and dinged(bent) the prop. Hope i can repair it .
                      Im running 0 degrees advance on AndyG's advice to get a good setup before winding up the advance for top end.
                      AndyM i could shave with this prop it that sharp!!!!
                      SimonO what prop did you run on your XS3 wooden weapon????
                      STUFF NITRO GO LIPO FASTELECTRICS.COM
                      OFF-SHORE-ELECTRICS.COM
                      INVENTOR OF LITHIUM CELLS:bowdow

                      Comment

                      • Simon.O.
                        Fast Electric Addict!
                        • Oct 2007
                        • 1521

                        #671
                        Originally posted by toysRme
                        SimonO what prop did you run on your XS3 wooden weapon????
                        With the 7XL I ran a 640 (a cut down 642 compliments from AndyM)
                        The 6XL likes the 637 as it can really wind out.
                        4deg AoA on the sponsons so far and I'll run 5 next time out.
                        See it....find the photos.....sketch it it....build it........with wood

                        Comment

                        • andym
                          More Go Than Show Prop Co
                          • Apr 2007
                          • 2406

                          #672
                          Andym thanks for the x645 you sharpened and balanced for my XS3 it ran awesome with less hop and more drive.
                          the XS3 ran 96 kph until i hit something in the water and bent the rudder and dinged(bent) the prop. Hope i can repair it
                          Send it back and I will happily have a look at it, unless it is cracked or really bent up the fix Ok

                          Comment

                          • toysRme
                            Member
                            • Jul 2009
                            • 75

                            #673
                            thanks Andy.when i receive my other props ill send to you for a rework.what type of balancer do you use?
                            what would be the best 4S fiegao to run in a mono or hydro with runtime/preformance?
                            SimonO wheres the video of your wood crafted XS3?
                            STUFF NITRO GO LIPO FASTELECTRICS.COM
                            OFF-SHORE-ELECTRICS.COM
                            INVENTOR OF LITHIUM CELLS:bowdow

                            Comment

                            • andym
                              More Go Than Show Prop Co
                              • Apr 2007
                              • 2406

                              #674
                              I am using a Kintec balancer at the moment, the motor question depends on what hull, 7 & 8xl are good rigger/hydro mototrs up to about the 30" mark, the mono will depend on what size hull. Under 30" a 8 or 9 xl over that and I would look at a 580 size motor.
                              Just my opinion of coarse

                              Comment

                              • Insaniac
                                Senior Member
                                • Jul 2010
                                • 422

                                #675
                                I've been following this thread for about a year now...did anyone get these riggers to stop hopping and start handling?
                                Support US hobby suppliers

                                Comment

                                Working...