(6) GP style ML Boatworks sport hydros to be built...any interest?

[timjz]

Per our discussion, deposit sent for a GP265v2 with FE Prototype Cowl build!
Thanks, Tim

[cybercrxt]

I got it! Thanks Tim. I will add you to the list. Mike

[cybercrxt]

The GP400 kits just arrived. I know what I will be doing this weekend! Mike

[flraptor07]

Cool!

[cybercrxt]

All of the kits are ready to start building. Had to take all the parts out of their cut sheets. I cleared up most everything that had to get done ahead of these builds, and I got all 4 cowlings for the GP400's laid up this weekend, so that is out of the way! They turned out great! mike

[lars_01]

Sounds great. Waiting to see more. Feel no pressure

[lars_01]

Are very grateful for the opportunity to get this boat built by Mike
Have ordered some stuff for the boat. Speedmaster strut and rudder from the OSE.
Castle / Traxxas XO-1 motor, 1650kv from Ebay and water jacket from OSE.
Would like to get the turn fin, not sure where I'll get it.
Are not sure which esc I should use, since previously a Flier 300A/8S, Turnigy 180/6s and Etti 150A/6S but considering a esc with dataloging. Any thoughts?
Really looking forward to putting together this boat and especially driving it!
Lasse

[cybercrxt]

I spoke to Dick Tyndall/ Virginia Craftsman last night. Anyone needing fins for their build, contact me. I can have him ship all of them to me, so I can ship with your boats out to you. I will get his paypal address, and you pay him directly for the fin and shipping to me. Mike

[tlandauer]

Hi Mike, thanks for everything, I would like to have a fin from DT/Virgina Craftsman.
I am so glad that I am back in this country!

[lars_01]

Hi Mike!
I´m in for a turnfin too!

[flraptor07]

Yes Mike, I would deffinetly like a turn fin from Dick Tyndall.. I've got everything else for the build and a MGM TMM 28026-3 X-2 lite series ESC is on it's way. I've even got my paint design drawn out.. It's really cool to have the boat built by the man himself!!

[cybercrxt]

Sounds good guys. I had already discussed this with TimNJ, and he wants one too. Just need to see if Darryl needs one, and I will put in an order to Dick as soon as possible. Mike

[timjz]

I'm in for the turnfin as well, let me know when & where to pay. Also, could you send me a hardware list whenever you get a chance?
Really looking forward to this, not sure if I'm going to paint it of leave it as is?
Thanks, Tim

[darryl whitman]

nice lids , on the turn fins , r u going to mount them, if we order them from u?
also I sent u 200$ more on my bill, thanks Darryl Whitman

[darryl whitman]

yes I will need one , turn fin from Dick for the boat.