B55 OM29 repaint !!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brushless55
    Creator
    • Oct 2008
    • 9488

    #1

    B55 OM29 repaint !!

    I'm having tons of fun racing at NAMBA20
    this is my first year and what a hoot!!
    so in the PSpec Mono class I race one of Randy's OM29 hulls with UL-1 power and a Grim 4255
    took a few races to get it locked in and now if ripps
    this is my OM29 at the last race on Aug 26th
    placed first in the first and second heat, then flipped on turn 4 on the 6th lap
    so it needs new paint


    Last edited by Brushless55; 09-13-2012, 12:56 AM.
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    OK, sand with 120, then with 200, then with around 400. Wipe clean with thinner, let dry. NO fingers touching the clean raw surface, the oil from your skin can make fisheyes. Light coat first, wait 5 min, then heavier coat. Go up and down the length of the hull from about 6 inches away and overlap the last pass.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • Brushless55
      Creator
      • Oct 2008
      • 9488

      #3
      got it striped down, and some sanding..

      Also with the help of Joe of JRS I found a split in the whole left side of the hull, where the top and bottom come together..
      lots of CA and its looking great


      .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

      Comment

      • Brushless55
        Creator
        • Oct 2008
        • 9488

        #4
        Gots some primer


        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

        Comment

        • Brushless55
          Creator
          • Oct 2008
          • 9488

          #5
          Ahhhh!
          had a little run in with over spray on paper while painting the bottom of the hull...
          hard to get off but with more sanding and reprime I'll get that sucker done
          .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

          Comment

          • Brushless55
            Creator
            • Oct 2008
            • 9488

            #6
            I dig this Rust-Oleum paint!


            .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

            Comment

            • monojeff
              Moderator
              • Nov 2010
              • 2562

              #7
              Nice work so far.
              Send me a template of your window and I will make you 1 for it!
              OSE GIFTING ELF
              HAPPY HOLIDAYS!!

              Comment

              • Brushless55
                Creator
                • Oct 2008
                • 9488

                #8
                I'll be racing this weekend...
                finals

                .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                Comment

                • Make-a-Wake
                  FE Rules!
                  • Nov 2009
                  • 5557

                  #9
                  Hey Todd, I usually apply a thin pinstripe around the windshield to really set it off.
                  Attached Files
                  NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                  Comment

                  • Brushless55
                    Creator
                    • Oct 2008
                    • 9488

                    #10
                    Kinda like this Carl?
                    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                    Comment

                    • HYDROJERRY
                      Fast Electric Addict!
                      • Jan 2010
                      • 2503

                      #11
                      Very nice!!! after doing the pinstripe around the windsheild i like to use a Permonent marker like a sharpie and put little dots on the pinstripe all the way around the windsheild then clear over it,,,makes it look like its bolted on!!!!

                      Comment

                      • Make-a-Wake
                        FE Rules!
                        • Nov 2009
                        • 5557

                        #12
                        Originally posted by Brushless55
                        Kinda like this Carl?
                        Yep.................very nice. I guess you are happy with the Rustoleum product, you did a nice job on it, now it will run better!!!!!!!!!!!!LOL
                        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                        Comment

                        • Brushless55
                          Creator
                          • Oct 2008
                          • 9488

                          #13
                          I do like the Rusty paint!


                          .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                          Comment

                          • Make-a-Wake
                            FE Rules!
                            • Nov 2009
                            • 5557

                            #14
                            Sweet!!

                            I think you have had way more painting practice than you led on to........................

                            You thinkin of a coat of clear?
                            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                            Comment

                            • Brushless55
                              Creator
                              • Oct 2008
                              • 9488

                              #15
                              Originally posted by Make-a-Wake
                              Sweet!!

                              I think you have had way more painting practice than you led on to........................

                              You thinkin of a coat of clear?


                              take a closer look at the shadowing in the pictures...
                              notice how your really cant see any paint lines
                              I put on 3 coats of clear
                              .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                              Comment

                              Working...