ML Boatworks GP265- Sport 12/ 2s lipo Sport Hydroplane- 26.5"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ray schrauwen
    Fast Electric Addict!
    • Apr 2007
    • 9471

    #31
    It looks to have a difference of approx. 3/32" to 1/8" that's why I tacked in a 1/8" strip. It's only tacked in at one end and can easily be removed. I just thought, whoa, that's a lot of material to remove and what is the contour going to be since it's the only high spot?

    Take a look
    Attached Files
    Nortavlag Bulc

    Comment

    • cybercrxt
      Fast Electric Addict!
      • Mar 2009
      • 2909

      #32
      Oh lord, I see what happened. When I redid the kit to the V2 kit, I forgot to adjust the height of that outside "knife" shaped piece of sheeting at the middle frame. You need to sand that down to match the framing as the frame height is correct. The front and rear of the knife will stay the same, the middle will be sanded like the following. Sorry about that. I remember when I was doing the V2 of the 265 I was in a rush as I was trying to get Darin Jordan's order out and that was something I told him I was going to do to the kit before it left for him. So Darin, your will need this change too!

      Sorry!!!!!!!

      Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

      Comment

      • ray schrauwen
        Fast Electric Addict!
        • Apr 2007
        • 9471

        #33
        Will do Mike. Thanks for the good picture to go by. Should be o.k. to fix I've build a few wood boats in my time.

        I'll print out the picture for reference. Thanks for the quick response Mike!!
        Nortavlag Bulc

        Comment

        • ray schrauwen
          Fast Electric Addict!
          • Apr 2007
          • 9471

          #34
          What is really cool is that the pic you gave me when printed out is the exact size of the part, so all I have to do is cut the pattern out and trace it to the pieces.
          Nortavlag Bulc

          Comment

          Working...