Hpr 06 / 115 build

[Chrisg81983]

I just added the cf plate to the standoff for rudder

[Remmie81]

2 thumbsup!

[nata2run]

Looks good buddy. Planing to run my little mystic in the morning...

[Chrisg81983]

Kent u got a pm

[ManuelW]

Hello Guys,

just want to chime in this thread. So far everythings looks great and very well done - no need to correct something.

For the teflon-discussion: I'm a huge fan of Teflon and can't imagine running a fast electric boat without teflon liner. That doesn't mean that I think it won't work without teflon liner - lots of guys do it and it works - just I would not do it.

And for the templates: Well almost impossible as everybody likes a little different position. Some try to get the drives as close to the tunnel as possible - I'm not a huge fan of that idea. I prefer to do it like Chris did, with a gap around 4-5mm on the HPR 06. But I try to keep the gap to the bottom as small as possible, maybe even 1mm lower than what Chris did (this needs some grinding work on the inner brass nut for a good fit). So as you see there are several different ways, and all of them work. And so far no real comparison if it is just personal favour or really has influence on performance.

regards,
Manuel

[bracka69]

Looking really good Chris. I can't wait to get my HPR C5009, only problem is I'm not confident enough to build the boat myself so I will have to find someone to do this for me. Our maybe you or someone else reading this could recommend and point me in the direction to someone who would be willing to build the boat for me.

Joshua

[Chrisg81983]

Bracka69 thanks ! If you are getting the hull from Manuel I would speak to him about possibly building it. There are several people that I would recomend to build a boat. Let me know what happens.

[bracka69]

Thanks Chris I will do that.

Joshua

[Chrisg81983]

Hey guys I haven't got much done due to lack of parts. I did speak to lmt and motors will ship out early this week. Then Manuel said he is waiting for my parts from hanspeter, and he should ship next Monday. For now I did manage to get the hatch botls installed. At the moment there are four 4mm countersunk bolts, but will be adding two more to it. Where the bolts go throught the hatch I layer some 4 mm thick cf plate into the middle of the epoxy to add some strength. Here are some pictures of the progress.
Dnt mind the one big picture tap talk always does something crazy for me
ImageUploadedByTapatalk1339944717.673992.jpg
ImageUploadedByTapatalk1339944743.752985.jpg
ImageUploadedByTapatalk1339944785.220367.jpg

ImageUploadedByTapatalk1339944825.228632.jpg
ImageUploadedByTapatalk1339944846.187780.jpg

[nata2run]

Looking good Chris.... Should be a sweet boat when done.

[bracka69]

Looking good Chris, can't wait to see this thing on the water. Hopefully I will order my HPR C5009 in a few weeks.

[Chrisg81983]

Thanks guys
@ Kent did u get the emails I sent you
@ bracka69 that sounds awesome you will love the hulls there are real fun to work on

[nata2run]

Chris got all your emails, lots of stuff to sort out. Will email you in the morning.... Getting late here (in bed with the iPad LOL slowly dosing off)

[Chrisg81983]

Oh also some graphics that Kent is working on for me. All looks perfect, I just would like to change we're the sponsons are. here are some pics and one of the way it should look when complete in blue and silver. I am liking the silver.

ImageUploadedByTapatalk1339946994.017965.jpg
ImageUploadedByTapatalk1339946860.616756.jpg
ImageUploadedByTapatalk1339947022.646289.jpg
ImageUploadedByTapatalk1339947042.533879.jpg

[bracka69]

WOW...... That looks awesome. I want to do either the Bud Light or JBS Racing for mine.