maritimo twin cat

[bonewar]

looks nice.
why do you have turn fins in the first picture?
you know. H and M boats are no proboats.. LOL

i don't no how those little suckers got in that photo, there now on my sv27.

[bonewar]

update

hi guys , got busy with strengthen the hull , first i cut to shape styrene to put inside the front of the hull for flotation and strength. then i made myself a carbon fiber bulk head . i glass in the carbon fiber cloth then added the bulk head . the boat is almost bullet Prof,it stiffened up everything nicely. the styrene only weigh 80g,the carbon cloth,bulk head added another 130g , so the total weight penalty was only 210grams,awesome. now its time to add the motor mounts, shafts, stingers,rudder. i will post more when Ive done this .

[kookie_guy]

wow, very nice job on the carbon fiber. looks super clean.

[fastbaltek]

sick build!

where did you get the stingers?

[Eyekandyboats]

that looks great. but in a a cat boat like that, i would be concerned that you blocked off a area where the batteries will be going to help with C of G.

[Mich. Maniac]

that looks great. but in a a cat boat like that, i would be concerned that you blocked off a area where the batteries will be going to help with C of G.

Naaa, I think the packs he has pictured are about where they will be if not further back. However I wonder why you didnt make a flat spot for motor mounts? Anyway. nice clean build so far!

[gumby]

If its done can we get some VIDEOS looks great man.

mike

[bonewar]

update 2

thanks for the comments, all will be revealed in the next couple of weeks, before i put any styrene or carbon into the cat i put all the components in and found the cog,( have a look at the pic with the lipos sitting in the hull , on the left side you can see a small black mark , where the lid shuts down on , this is the cog for the hull) the lipos go pretty much where they are and the motors will go down in the sponsons, the rest of the gear goes under the back hatch, the esc's go in the sponsons as well, just trying to figure out where to run all the water tubes so the inside looks clean. Mich I'm using the original motor mounts that came with the hull , so no need for a flat spot. I'm going to glass them in when i figure out where they need to be.

[bonewar]

that looks great. but in a a cat boat like that, i would be concerned that you blocked off a area where the batteries will be going to help with C of G.

eyekandyboats mate have you ever built a h&m maritimo cat,do you think i would put a bulk head in if my batteries where suppose to go there , mate i appreciate the comments but please don't ruin my thread with silly comments about things you don't understand. fell free to ask me why. or is it better to criticize every pic i summit. mate I'm doing this for those people out there who are interested in this boat,and just maybe help someone else build one of these boats.

[G Doggett]

Keep up the good work Boney.
I can't wait to see the finished boat and a video of it on the water.
I almost bought one of those hulls from Andrew G, it was a toss up between the Maritimo and the Jolly.
Twin cats rock.
Graham.

[Mich. Maniac]

just trying to figure out where to run all the water tubes so the inside looks clean. Mich I'm using the original motor mounts that came with the hull , so no need for a flat spot. I'm going to glass them in when i figure out where they need to be.

I hear ya on the routing of wires and cooling. I think I have figured mine out and well, things have to go where they end up sometimes! I am kinda bummed cause I didnt get motor mounts with mine. I was hoping to get some vid of mine this weekend but its just not gonna happen. Keep it goine Bonewar. Wish we were closer geographicly to race em!!!

[SJFE]

Rick
Keep up the good work. This is build ranks on the top of the list with any I have seen before. We are all greatfull your sharing this work of art with us.
Tom G

[Eyekandyboats]

eyekandyboats mate have you ever built a h&m maritimo cat,do you think i would put a bulk head in if my batteries where suppose to go there , mate i appreciate the comments but please don't ruin my thread with silly comments about things you don't understand. fell free to ask me why. or is it better to criticize every pic i summit. mate I'm doing this for those people out there who are interested in this boat,and just maybe help someone else build one of these boats.

I'm sorry for offering my advice. having setup multiple cats in my past 7 years of boating I clearly know nothing. having built several boats and one that is currently on the market and two that are soon coming.
and you have not yet built a Maritimo cat either, you are still currently building it and have not yet had it in the water.
advice is all I gave and a smart ass answer is what i received. I hope your attitude toward others does not represent all Australians
now back to topic.

[Scott T]

Rick,

The build is going great mate! You should have a fast, durable boat once it's done.

Hwo are you going with your decals? If you need some of the ones I couldn't provide, shoot the Maritimo team an email. They were very helpful to me.

Looking forward to some video when she's done

Scott

[bonewar]

sick build!

where did you get the stingers?

fastbaltek mate , the drives are called mtc powertrimm v (long version) .you can buy them from mhz usa , thet cost $143us . pic1 is the short version, pic 2 is the long version. hope this helps