maritimo twin cat

[bonewar]

just a quick look at the next project,1 maritimo cat (h&m),2-neu brushless motors,2-120 amp hydra esc,2- wire drive lines,2- mtc powertrimm stingers, 1- toysports rudder. still waiting on parts to complete . will post more on the cat as i build her.

[H&MWill]

Cant wait to see her get going! Should be sweeeet

[Mich. Maniac]

Nice stuff. your layout looks exact to mine. Cant wait to see em both run. I hope yours is much faster since you have spent the mula on some expensive yet quality stuff! good luck

[Mich. Maniac]

How do you adjust your struts???

[Flying Scotsman]

Very nice equipment. What size of counter rotating props?

Douggie

[Quicksilver]

How do you adjust your struts???

I'm probably pulling a "captain obvious" but it seems the struts are laying on their sides and their is no vertical adjustment......that I can see.

Still, the boat looks awesome

[Steven Vaccaro]

Quicksiver I'm pretty sure the strut is just laying there unmounted to give us a sneak peak.

[Quicksilver]

That makes a hell of a lot more sense doesn't it? I'm sorry I had just woke up.

[bonewar]

hi mich maniac, the struts adjust up and down with a alan key (pic

) the pic is the same strut on the back of my sv-27,flying scotsman the props i will start with will be 42mm counter rotating(cf) later change to sharpen/polished c.b props,quicksilver the strut lying on the cat is on its side, it stands upright and allows adjustment-or+ strut angle.

[Flying Scotsman]

How do you adjust your struts???

I am also puzzled. Where are you going to attach the strut support?

Douggie

[Mich. Maniac]

AHHHh, I see now. Slick stuff man. there will be plenty of room for supports and adjustment. Sorry to clutter up your thread man!

[bonewar]

twin cat

ok i got myself busy i made up some motor mounts and some plates that will go on the inside of the hull against the transom 2 for each sponsons transom 1 for the rudder placment for added strenght and peace of mind . the next part will be mounting the motor mounts in the hull at the right angle than i will renforce the motor with another plate(pic) i just have to cut the right height so both motors will be supported with 2 mounts. will post pics when i have completed the mounts . the stingers in the photo are mtc prowertrim they will go on the cat when i do the motor mounts.

[bonewar]

the maritimo cat awsome!

[bonewar]

update on the maritimo

well ive got myself busy with some painting , im going to make the boat look as close to the real boat as possible , so i've got a bit of detailing to do . this is where im up to .

[Eyekandyboats]

looks nice.
why do you have turn fins in the first picture?
you know. H and M boats are no proboats.. LOL